Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2021

OR

For the transition period from                      to                     

Commission File Number 001-39533

Corsair Gaming, Inc.

(Exact name of registrant as specified in its charter)

47100 Bayside Pkwy

Fremont, CA 94538

(Address of principal executive offices and zip code)

(510) 657-8747

Registrant’s telephone number, including area code

Securities registered pursuant to Section 12(b) of the Act:

Securities registered or to be registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.  Yes ☐ No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).  Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes ☐ No ☒

The aggregate market value of the registrant's common stock held by non-affiliates as of June 30, 2021, the last business day of the registrant’s most recent second fiscal quarter, was $1,204,332,297 based on the closing price as reported by the Nasdaq Global Select Market.

As of February 14, 2022, 95.2 million shares of the registrant’s common stock, $0.0001 par value per share, were issued and outstanding.

Table of Contents

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s Definitive Proxy Statement for the 2022 Annual Meeting of Stockholders, or the Proxy Statement, to be filed within 120 days of the end of the fiscal year ended December 31, 2021, are incorporated by reference in Part III hereof. Except with respect to information specifically incorporated by reference in this Annual Report on Form 10-K, the Proxy Statement is not deemed to be filed as part hereof.

Table of Contents

Table of Contents

i

Table of Contents

NOTE ABOUT FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934 (the Exchange Act) that reflect our current views with respect to, among other things, our operations and financial performance. These forward-looking statements are included throughout this Annual Report and relate to matters such as our industry, business strategy, goals and expectations concerning our market position, future operations, margins, profitability, capital expenditures, liquidity and capital resources and other financial and operating information. We have used the words “anticipate,” “assume,” “believe,” “continue,” “could,” “estimate,” “expect,” “foreseeable,” “future,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “seek,” “will” and similar terms and phrases to identify the forward-looking statements.

The forward-looking statements contained in this Annual Report on Form 10-K are based on management’s current expectations and are subject to uncertainty and changes in circumstances. There can be no assurance that future developments affecting us will be those that we have anticipated. Actual results may differ materially from these expectations due to changes in global, regional or local economic, business, competitive, market, regulatory and other factors, many of which are beyond our control, including, for example, the COVID-19 pandemic. We believe that these factors include but are not limited to those described under Part I, Item 1A, “Risk Factors” in this Annual Report on Form 10-K. These factors should not be construed as exhaustive and should be read in conjunction with the other cautionary statements that are included in this Annual Report on Form 10-K. We undertake no obligation to publicly update or review any forward-looking statement, whether as a result of new information, future developments or otherwise, except as may be required by any applicable securities laws.

1

Table of Contents

PART I

Item 1. Business.

Overview

Corsair Gaming, Inc. (also referred to in this document as “Corsair,” “we,” the “company,” or the “registrant”) is a leading global provider and innovator of high-performance gear for gamers, streamers and content creators, many of which build their own PCs using our components. Our industry-leading gaming gear helps digital athletes, from casual gamers to committed professionals, perform at their peak across PC or console platforms, and our streaming gear enables streamers and content creators to produce studio-quality content to share with friends or to broadcast to millions of fans. Our PC components products offer our customers multiple options to build their customized gaming and workstation desktop PCs. We design and sell high-performance gaming and streaming peripherals, components and systems to enthusiasts globally.

We have served the market for over two decades and many of our products maintain leading market share positions, according to external market data and internal estimates. We have built a passionate base of loyal customers due to our brand authenticity and reputation as a provider of innovative and finely engineered products that deliver a high level of performance.

Our solution is the most complete suite of gear among our major competitors and addresses the most critical components for both game performance and streaming. Our product offering is enhanced by our two proprietary software platforms: iCUE for gamers and Elgato’s streaming suite for streamers and content creators, including our Stream Deck control software. These software platforms provide unified, intuitive performance, and aesthetic control and customization across their respective product families. We group our products into two categories (segments):

Our gear is sold to end users worldwide through our retail channel or our direct-to-consumer channel. In our retail channel, we distribute our gear either directly to the retailer, such as Amazon and Best Buy, or through distributors. 

We believe our brand, scale and global reach provide significant competitive advantages and will allow us to continue to capture a growing share of the expanding gaming and streaming market. We believe we can continue to grow by offering market-leading gear

2

Table of Contents

to gamers, streamers and content creators, expanding the breadth of our product suite to meet the needs of our customers, growing our worldwide market share, continuing to invest in marketing, product innovation and sales, and selectively pursuing accretive acquisitions, such as the eight acquisitions we have completed since 2018.

Our Industry

Since traditional arcade games of the 1970s, gaming has evolved into the mainstream and taken a central place in the global entertainment landscape. According to Activate Research, gaming today represents approximately 11% of all American consumer internet and media activity, surpassing activities such as social media and messaging. Further, based on external market data, in the fourth quarter of 2021, it was estimated that the worldwide gaming community consisted of approximately 1.4 billion casual PC gamers, 125 million regular PC gamers and 24 million PC gaming enthusiasts. We believe this indicates that the majority of the gaming hardware total addressable market is still consumed by a small percentage of gamers, and as a result, there is significant potential opportunity for gaming hardware sales.

There are a number of drivers we believe will continue to fuel the gaming market’s expansion. Technology continues to improve game quality. There is increasing availability and variety of high quality, interactive game content as game publishers use cutting-edge game development engines to rapidly create graphically sophisticated and engaging virtual worlds, many of which can support massive multiplayer experiences. Audiences are progressively engaging more with gaming content across platforms and finally, there are decreasing barriers to gaming, where more gamers using mobile devices, and the console and PC platforms represent a natural upgrade path for those seeking a more immersive or competitive gaming environment.

In parallel, digital content creation today has democratized, with content sharing, video-first communication and voice-chat being the norm among creators, viewers and gamers. Gaming content creation and streaming is now ubiquitous, with many active gaming channels on YouTube and live streaming hours watched across Twitch, Mixer, YouTube Gaming and Facebook Gaming is growing. The proliferation of gaming content is attracting new gamers and increasing the performance focus of existing gamers. Beyond success in gaming, applications for streaming gear are proliferating across use cases including podcasting, video blogging, interactive fitness, remote learning, and work-from-home, among others. While emerging, these applications represent a promising avenue for continued expansion of the streaming gear market opportunity.

We believe that the growth in gaming and streaming has enhanced demand for our gear by inspiring gamers and creators to reach for the next level of performance and content quality. Competitive gaming rewards speed, precision and reliability. As in other sports, specialized high-performance gear such as gaming mice, keyboards, headsets and performance controllers allow digital athletes to perform at their best. Modern games also require significant processing power to render high-resolution graphics, and reward the speed and precision of user inputs, driving demand for powerful gaming components and systems. Further, in a world where the ability to create content is democratized and competition for viewer engagement is greater than ever, content creators, particularly streamers, are increasingly seeking ways to maximize the quality of their video capture and broadcasting, which requires specialized high-performance gear.

Competitive gamer performance needs are being met with specialized gear, such as ultra-precise optical sensors in gaming mice, very low actuation distances in gaming keyboard switches, customizable rear paddles on performance controllers, liquid cooling solutions for high-performance processors and overclocked DRAM modules to process graphically complex games. Similarly, the broadcast quality expected of streamers has increased significantly and a traditional webcam does not produce the professional quality audiences expect of content. Dedicated capture cards are required to record and broadcast video at high resolution, high fidelity microphones are required to ensure clear sound quality, studio lighting and green screens improve production quality, high resolution USB cameras are required to capture smooth and clear images, and dedicated software is required to allow a single-person operation to optimize the streaming experience, preventing lag and fidelity loss. Further, gamers striving for peak performance have heightened requirements for ergonomics and durability, and gamers and streamers often wish to express their personal style or brand with their choice of gear, including a range of appealing design options and opportunities for customization. Finally, gear integration has become an important feature, where gamers and streamers need all of their gear to integrate harmoniously and need the ability to fine-tune that gear, which we believe is an experience best delivered with a software platform that seamlessly integrates and unifies control across devices. Our two proprietary software ecosystems cover the broadest range of gaming peripherals, components and streaming gear, which we believe are unmatched by anything else in the market.

Our Competitive Strengths

We are a leading global provider and innovator of high-performance gaming gear. We believe that we have a strong position in our target markets, which consist of gamer and creator peripherals, and gaming components and systems markets, as a result of the following competitive strengths:

3

Table of Contents

Our Growth Strategy

We intend to grow our business by increasing value to our customers, expanding our market opportunity and further differentiating ourselves from competitors. Key components of our strategy include:

4

Table of Contents

Our Solutions

We design our high-performance gear to address the needs of gamers, streamers and content creators. To help our customers perform at their peak, whether in game or on camera, we have developed the industry’s most complete integrated ecosystem of gamer and creator peripherals and gaming components and systems. We have a diversified product portfolio, with 30 primary product lines.

Our iCUE software platform powers the full range of our gear from a single intuitive interface, providing advanced performance tuning, user customization and system monitoring. By enabling our customers to fine tune the response of our gaming gear to maximize performance and match their personal preferences and styles of play, we believe that iCUE provides a distinct competitive advantage.

Product Development

5

Table of Contents

Innovation is a key element of our culture and critical to our success. Our product development efforts focus on broadening our portfolio with innovative, value-added products that provide gamers with more immersive experiences. This process begins with the initial market analysis and product definition phase, where we use deep knowledge of consumer preferences and feedback to decide the exact specifications of new products desired by our end-users. We then leverage third-party manufacturers and, in some cases, engineering and design firms to help us design, prototype and fabricate our products. We select these third-party partners through a comprehensive selection process and subject them to rigorous quality controls. We perform extensive in-house testing of our products with the latest CPUs and GPUs to ensure optimal performance and compatibility of our products with the most advanced hardware. Our rigorous product development and testing is designed to give us the ability to meet the needs of our end-users consistently with well-designed, high-performance and reliable products. We intend to continue to significantly invest in product development to support the design and development of innovative, high-quality products and solutions to maintain and enhance our competitive position.

Marketing

Our marketing efforts are designed to enhance the Corsair, Elgato, Origin and SCUF brand names, to help us acquire new customers and to increase sales from our existing customers. We have structured our marketing organization to achieve both product- and geography-specific coverage. In addition, our marketing personnel regularly meets with other key industry suppliers such as Intel, AMD, NVIDIA and Asus, in order to ensure that our product development efforts appropriately address the needs of their new products and also to discuss trends and changes in the computer technology market.

We build awareness of our products and brand through advertising campaigns, public relations efforts, marketing development funds and other financial incentives provided to retailers to promote our products, end-user rebates, online social media outreach, online and in-store promotions and merchandising, our website and other efforts. We believe that our products and brand have also benefited from social media influencers, customer referrals and positive product reviews. We also invest in sponsorships and partnerships with esports events, leagues teams and streaming influencers.

We benefit from an active computer gaming community whose members communicate with each other through various online social media such as forums, blogs and social networks, including Facebook, Twitter and YouTube. In addition to forums hosted by third-party domains, we host Corsair-branded forums that are accessible via our website. We actively participate in this community, enabling us to communicate directly with our end customers. Finally, we regularly publish technical and editorial content through various online and print channels and participate in industry trade shows, gaming competitions and other consumer-facing events that provide us with the opportunity to demonstrate our products.

Sales and Distribution

Our gear is purchased by gaming enthusiasts worldwide through either our e-tail and retail channel or our direct-to-consumer channel. In our e-tail and retail channel, we distribute our gear either directly to our reseller or through key distributors. While we historically have sold our gear directly to consumers through our website, following our acquisitions of Origin and SCUF Gaming in 2019, the volume of direct-to-consumer sales has increased as both of these companies primarily generated sales through direct-to-consumer channels. We believe direct-to-consumer sales represent a significant avenue to drive growth by facilitating increased market penetration across our product categories.

We have organized our sales organization into four major geographic regions—Europe (including the Middle East and North Africa), North America, Latin America and Asia Pacific (including South Africa)—and we have local language-speaking sales representatives in the countries that, in the aggregate, generate the majority of our net revenue. We ship our products directly to retailers and distributors and, through distributors, supply our products to thousands of smaller online and brick-and-mortar retailers and to specialist and gaming system integrators and value-added resellers. A small portion of our net revenue is from sales directly to original equipment manufacturers that manufacture gaming PCs.

In 2021, 2020 and 2019, Amazon accounted for more than 10% of our net revenue, at 26.7%, 24.6% and 25.1%, respectively.

Production and Operations

We believe we have developed a global, scalable production and operations infrastructure that allows us to deliver our products cost-effectively and in a timely manner. We operate a facility in Taiwan where we assemble, test, package and ultimately supply nearly all of our DRAM modules and a significant portion of our customized gaming controllers, liquid cooling products and prebuilt gaming systems. We also assemble, test, package and ultimately supply our custom-built PCs in our U.S. facility, and our customized gaming controllers in our U.S. and U.K. facilities. All of the other gear we sell is produced at factories operated by third parties

6

Table of Contents

located in Asia. In addition, we outsource storage and shipping to several third-party logistics providers around the world which allows us to reduce order fulfillment time, reduce shipping costs and improve inventory flexibility.

Production of most of our high-speed DRAM modules involves testing and speed sorting of both DRAM ICs and modules and retail packing in our facility in Taoyuan, Taiwan. Our ability to test and sort DRAM modules efficiently enables us to grade them and offer high-performance DRAM modules at higher price points. For standard speed DRAM modules, we also procure assembled modules from approved subcontractors and then test and package them in our Taiwan facility.

In addition to our production capabilities, our corporate planning process places particular emphasis on driving efficiencies in demand forecasting, supply chain planning, procurement cycle time, freight costs and inventory management. Given the products we sell and the global nature of our business, freight costs can have a significant impact on our expenses, because of this, we have developed a sophisticated forecasting and planning process designed to reduce the cost of transporting our products to our regional distribution hubs and finally, to our customers.

The COVID-19 pandemic has affected our supply chain consistent with its effect across many industries, including creating shipping and logistics challenges, increasing freight costs significantly, and placing significant limits on component supplies. While we anticipated industry-wide supply chain tightening we took proactive inventory buffering measures in order to position us well during the second half of 2021 and going forward. We will take additional inventory actions as appropriate to align with market demand, and will continue to leverage strong partnerships with our suppliers.

Seasonality

Since 2020, our revenue seasonality has been impacted positively and negatively, and thus has not followed historic patterns, by external events, such as shelter-in-place restrictions, global supply chain and logistics issues and availability of affordable GPUs, primarily caused by the COVID-19 pandemic. Historically, prior to 2020, we have experienced and expect to continue to experience seasonal fluctuations in sales due to the buying patterns of our customers and the spending patterns of gamers. Our net revenue has generally been lower in the first and second calendar quarters due to lower consumer demand following the fourth quarter holiday season and because of the decline in sales that typically occurs in anticipation of the introduction of new or enhanced CPUs and GPUs, which usually take place in the second calendar quarter and which tend to drive sales in the following two quarters. Further, our net revenue tends to be higher in the third and fourth calendar quarter due to seasonal sales such as “Black Friday,” “Cyber Monday” and “Singles Day” in China, as retailers tend to make purchases in advance of these sales. Our sales also tend to be higher in the fourth quarter due to the introduction of new consoles and high-profile games in connection with the holiday season. As a consequence of seasonality, our net revenue for the second calendar quarter is generally the lowest of the year followed by the first calendar quarter. Historical seasonal patterns may not continue in the future and have been impacted, and may be further impacted in the future, by increasing supply constraints, GPU shortages, shifts in customer behavior and the evolving impacts of the COVID-19 pandemic.

Competition

We face intense competition in the markets for all of our products. We operate in markets that are characterized by rapid technological change, constant price pressure, rapid product obsolescence, evolving industry standards and new demands for features and performance. We experience aggressive price competition and other promotional activities by competitors, including in response to declines in consumer demand and excess product supply or as competitors seek to gain market share.

We believe that the principal competitive factors that affect customer preferences include brand awareness, reputation, breadth and depth of product offering, product performance and quality, design and aesthetics, price, user experience, online product reviews and other value propositions. We believe we compete favorably based on these factors.

In recent years, we have added new product categories and we intend to continue to introduce new product categories in the future. To the extent we are successful in adding new product categories, we will confront new competitors, many of which may have more experience, better known brands and greater distribution capabilities in the new product categories and markets than we do. In addition, because of the continuing convergence of the markets for computing devices and consumer electronics, we expect greater competition in the future from well-established consumer electronics companies. Many of our current and potential competitors, some of which are large, multi-national businesses, have substantially greater financial, technical, sales, marketing, personnel and other resources and greater brand recognition than we have. Our competitors may be in a strong position to respond quickly to new technologies and may be able to design, develop, market, and sell their products more effectively than we can. In addition, some of our competitors are small or mid-sized specialty companies, which may enable them to react to changes in industry trends or

7

Table of Contents

consumer preferences or to introduce new or innovative products more quickly than we can. As a result, our product development efforts may not be successful or result in market acceptance of our products.

Our ability to compete successfully is fundamental to our success in existing and new markets. If we do not compete effectively, demand for our products could decline, our net revenues and gross margin could decrease and we could lose market share, which could seriously harm our business, results of operations and financial condition. See the risk factor under the heading “Risks Related to our Business— We face intense competition, and if we do not compete effectively, we could lose market share, demand for our gear could decline and our business may be seriously harmed” in Item 1A of this Form 10-K for further details and a summary of our key competitors.

Intellectual Property

We consider the Corsair brand and its associated sub-brands to be among our most valuable assets. Our future success depends to a large degree upon our ability to defend the Corsair brand and its associated sub-brands from infringement and, to a limited extent, to protect our other intellectual property. We rely on a combination of copyright, trademark, patent and other intellectual property laws and confidentiality procedures and contractual provisions such as non-disclosure terms to protect our intellectual property.

As of December 31, 2021, our worldwide intellectual property portfolio consisted of 291 patents issued and 104 patents pending applications, 431 trademarks issued and 36 trademarks pending applications. We believe that our patents and trademarks and their applications are important for maintaining the competitive differentiation of our products and services, enhancing our freedom of action to sell our products and services in markets in which we choose to participate, and maximizing our return on research and development investments. The expansion of our business has required us to protect our trademarks, domain names, copyrights, and patents and, to the extent that we expand our business into new geographic areas, we may be required to protect our trademarks, domain names, copyrights, patents and other intellectual property in an increasing number of jurisdictions, a process that is expensive and sometimes requires litigation.

For a discussion of risks attendant to intellectual property rights, see “Risk Factors—Risks Related to our Business—Our future success depends to a large degree upon our ability to defend the Corsair brand and product family brands such as SCUF, Vengeance, K70, Elgato and iCUE from infringement and, if we are unable to protect our brand and other intellectual property, our business may be seriously harmed” and “Risk Factors—Risks Related to our Business—We are, have in the past been, and may in the future be, subject to intellectual property infringement claims, which are costly to defend, could require us to pay damages or royalties and could limit our ability to use certain technologies in the future” in item 1A.

Environmental Matters

Our operations, properties and products are subject to a variety of U.S. and foreign environmental laws and regulations governing, among other things, air emissions, wastewater discharges, management and disposal of hazardous and non-hazardous materials and waste and remediation of releases of hazardous materials. We believe, based on current information that we are in material compliance with environmental laws and regulations applicable to us. However, our failure to comply with present and future requirements under these laws and regulations, or environmental contamination or releases of hazardous materials on our leased premises, as well as through disposal of our products, could cause us to incur substantial costs, including clean-up costs, personal injury and property damage claims, fines and penalties, costs to redesign our products or upgrade our facilities and legal costs, or require us to curtail our operations, any of which could seriously harm our business.

Human Capital Resources

As of December 31, 2021, we had a total of 2,490 employees, including temporary employees and dedicated sales and software developer contractors. None of our employees is currently represented by a labor union or is covered by a collective bargaining agreement with respect to his or her employment. To date we have not experienced any work stoppages, and we consider our relationship with our employees to be good.

Our human capital resources objectives include, as applicable, identifying, recruiting, retaining, incentivizing and integrating our existing and additional employees. The principal purposes of our equity incentive plans are to attract, retain and motivate selected employees, consultants and directors through the granting of stock-based compensation awards and cash-based performance bonus awards.

8

Table of Contents

Corporate Information

We incorporated in Delaware in 2017 as EagleTree-Carbide Acquisition Corp. and we changed our name to Corsair Gaming, Inc. in 2018. We completed the initial public offering, or the IPO, of our common stock in September 2020 and our common stock is listed on the Nasdaq Global Select Market under the symbol “CRSR.” Our principal executive offices are located at 47100 Bayside Pkwy, Fremont, California 94538, and our telephone number is (510) 657-8747.

Available Information

We file annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to reports filed or furnished pursuant to Sections 13(a) and 15(d) of the Exchange Act. The SEC maintains a website at www.sec.gov that contains reports, proxy and information statements, and other information that we file with the SEC electronically. Copies of our reports on Form 10-K, Forms 10-Q, Forms 8-K, and amendments to those reports may also be obtained, free of charge, electronically through our investor relations website located at www.corsair.com as soon as reasonably practical after we file such material with, or furnish it to, the SEC.

Information about Our Executive Officers

Corsair’s executive officers as of March 1, 2022 are as follows:

Andrew J. Paul co-founded Corsair in 1994. He has served as our Chief Executive Officer and President since 1994 and we appointed Mr. Paul to our board of directors in September 2018. Previously, Mr. Paul served as President of the Multichip Division at Cypress Semiconductor Corporation, a provider of semiconductor devices. Mr. Paul also founded Multichip Technology, Inc., a provider of high-performance memory modules and electronics in 1987, and the business was sold to Cypress Semiconductor Corporation in 1993. Prior to that, he worked as a marketing manager at Integrated Device Technology, Inc. and in several sales and marketing positions at Fairchild Semiconductor Incorporated. Mr. Paul holds a B.Sc. (Hons) in Physics from The City University, London, England.

Thi L. La has served as our President since January 2021 and as our Chief Operating Officer since August 2013. Ms. La was appointed to our board of directors in December 2021. From May 2010 to August 2013, Ms. La served as our Senior Vice President and General Manager of our gaming PC component unit. Previously, from April 2008 to July 2010, she served as the Vice President of Global Operations and Information Technology at Opnext, Inc., a designer and manufacturer of optical transponders for communications uses. From 1997 to 2008, she held various positions at HP, including Director of Consumer Desktop PC, Display and Accessories for North America. Ms. La holds a B.S. in Electrical Engineering from San Jose State University.

Michael G. Potter has served as our Chief Financial Officer since November 2019. Previously, Mr. Potter worked as a business consultant, including interim Chief Financial Officer work and advising a large pension fund. Prior to that, from July 2011 to May 2016, Mr. Potter was Chief Financial Officer and Chief Legal Officer at Canadian Solar, a company listed on the Nasdaq Exchange. Prior to that, Mr. Potter spent 10 years in the semiconductor industry holding multiple Chief Financial Officer roles at public companies including Lattice Semiconductor Corporation, Neophotonics and STATS ChipPac. Prior to that, Mr. Potter worked for six years at Honeywell in various financing and accounting positions, and at KPMG in Montreal as an auditor. Mr. Potter is a member of the board of Cordelio Power, Inc. and serves as the chair of its audit committee. Mr. Potter is a Chartered Professional Accountant (CPA). He received a Graduate Diploma of Public Accountancy from McGill University, and a BComm in Accounting from Concordia University.

Gregg A. Lakritz has served as our Vice President, Corporate Controller since November 2017. From July 2017 to October 2017, Mr. Lakritz served as a Senior Strategic Consultant at Trimble Inc., or Trimble. From September 2011 to June 2017 he worked at Harmonic Inc., a publicly traded company which sells high-performance video software and cable access solutions, where he served initially as the Vice President and Corporate Controller from September 2011 to December 2014, and then as Chief Accounting Officer, Vice President and Corporate Controller. Previously, Mr. Lakritz also served as a Corporate Controller at Trimble, from

9

Table of Contents

October 2005 to September 2011. Mr. Lakritz is a Certified Public Accountant and he earned a B.A. in Accounting from the University of Wisconsin-Milwaukee and an M.B.A. from the University of Wisconsin-Madison.

Item 1A.

Risk Factor Summary

Below is a summary of the principal factors that make an investment in our common stock speculative or risky. This summary does not address all of the risks that we face. Additional discussion of the risks summarized in this risk factor summary, and other risks that we face, can be found below under the heading “Risk Factors” and should be carefully considered, together with other information in this Annual Report on Form 10-K and our other filings with the Securities and Exchange Commission (SEC) before making investment decisions regarding our common stock.

Risk Factors

Our business involves significant risks, some of which are described below. You should consider carefully the risks and uncertainties described below, together with all of the other information contained in this Annual Report on Form 10-K such as “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes. If any of the following risks actually occurs, our business, reputation, financial condition, results of operations, revenue and future prospects could be seriously harmed. In such event, the market price of our common stock could decline and you could lose all or part of your investment. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that adversely affect our business. This Annual Report on Form 10-K also contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of factors that are described below and elsewhere in this Annual Report. Unless otherwise indicated, references to our business being

10

Table of Contents

seriously harmed in these risk factors and elsewhere will include harm to our business, reputation, financial condition, results of operations, revenue and future prospects.

Risks Related to Our Business

Our competitive position and success in the market depend to a significant degree upon our ability to build and maintain the strength of our brands among gaming enthusiasts and streamers, and any failure to build and maintain our brands may seriously harm our business.

We regard our brands as a valuable asset, and we consider it essential to both maintaining and strengthening our brands that we be perceived by current and prospective customers as a leading supplier of cutting-edge, high-performance gear for gaming and streaming. This requires that we constantly innovate by introducing new and enhanced gear that achieves significant levels of acceptance among gamers. We also need to continue to invest in, and devote substantial resources to, advertising, marketing and other efforts to create and maintain brand recognition and loyalty among our retailer customers, distributors and gamers. However, product development, marketing and other brand promotion activities may not yield increased net revenue and, even if they do, any increased net revenue may not offset the expenses incurred in building our brands. Further, certain marketing efforts such as sponsorship of esports athletes, content creators or events could become prohibitively expensive, and as a result these marketing initiatives may no longer be feasible.

If we fail to build and maintain our brands, or if we incur substantial expenses in an unsuccessful attempt to build and maintain our brands, our business may be harmed. Our brands may also be damaged by events such as product recalls, perceived declines in quality or reliability, product shortages, damaging action or conduct of our sponsored esports athletes or content creators and other events, some of which are beyond our control.

Our success and growth depend on our ability to continuously develop and successfully market new gear and improvements. If we are unable to do so, demand for our current gear may decline and new gear we introduce may not be successful.

The gear we sell, which includes gamer and creator peripherals and gaming components and systems, is characterized by short product life cycles, frequent new product introductions, rapidly changing technology and evolving industry standards. In addition, average selling prices of some of our gear tend to decline as the gear matures, and we expect this trend to continue. As a result, we must continually anticipate and respond to changing gamer requirements, innovate in our current and emerging categories of gear, introduce new gear and enhance existing gear in a timely and efficient manner in order to remain competitive and execute our growth strategy.

We believe that the success of our gear depends to a significant degree on our ability to identify new features or category opportunities, anticipate technological developments and market trends and distinguish our gear from those of our competitors. In order to further grow our business, we also will need to quickly develop, manufacture and ship innovative and reliable new gear and enhancements to our existing gear in a cost-effective and timely manner to take advantage of developments in enabling technologies and the introduction of new computer hardware, such as new generations of GPUs and CPUs, and computer games, all of which drive demand for our gear. Further, our growth depends in part on our ability to introduce and successfully market new gear and categories of gear. For example, in the last 18 months, we entered into three large new markets, namely the microphones and cameras market for content creators and the gaming monitors market for both gamers and content creators, and in the future, we intend to introduce other gear designed to appeal to these markets. To the extent we do so, we will likely encounter competition from large, well-known consumer electronics and peripherals companies. Some of these companies have significantly greater financial, manufacturing, marketing and other resources than we do and may be able to devote greater resources to the design, development, manufacturing, distribution, promotion, sale and support of their products. We cannot predict whether we will be successful in developing or marketing new gear and categories of gear and, if we fail to do so, our business may be seriously harmed.

In addition, we implemented a work from home policy for many of our employees as a result of the COVID-19 coronavirus outbreak, which may have a substantial impact on attendance, morale and productivity, disrupt access to facilities, equipment, networks, corporate systems, books and records and may add additional expenses and strain on our business. The duration and extent of the impact from the coronavirus outbreak on our business depends on future developments that cannot be accurately predicted at this time, such as the severity and transmission rate of the virus, the extent and effectiveness of containment actions and the impact of these and other factors on our employees. If a substantial number of our employees continue to work from home, it could negatively impact new gear and improvements and potentially result in delays or releasing significant updates.

11

Table of Contents

If we do not execute on these factors successfully, demand for our current gear may decline and any new gear that we may introduce may not gain widespread acceptance. If this were to occur, our business may be seriously harmed. In addition, if we do not continue to distinguish our gear through distinctive, technologically advanced features and designs, as well as continue to build and strengthen our brand recognition and our access to distribution channels, our business may be seriously harmed

We depend upon the introduction and success of new third-party high-performance computer hardware, particularly GPUs and CPUs, and sophisticated new video games to drive sales of our gear. If newly introduced GPUs, CPUs and sophisticated video games are not successful, if the rate at which those products are introduced declines, or if they are not readily available, it may seriously harm our business.

We believe that the introduction of more powerful GPUs, CPUs and similar computer hardware that place increased demands on other system components, such as memory, PSUs or cooling, has a significant effect on the demand for our gear. The manufacturers of those products are large, public, independent companies that we do not influence or control. As a result, our business results can be materially affected by the frequency with which new high-performance hardware products are introduced by these independent third parties, whether these products achieve widespread acceptance among gamers, whether such products are readily available at affordable prices and whether additional memory, enhanced PSUs or cooling solutions, new computer cases or other peripheral devices are necessary to support those products. Although we believe that, historically, new generations of high-performance GPUs and CPUs have positively affected the demand for our gear, there can be no assurance that this will be the case in the future. For example, the introduction of a new generation of highly efficient GPUs and CPUs that require less power or that generate less heat than prior generations may reduce the demand for both our power supply units and cooling solutions. In the past, semiconductor and computer hardware companies have typically introduced new products annually, generally in the second calendar quarter, which has tended to drive our sales in the following two quarters. If computer hardware companies do not continue to regularly introduce new and enhanced GPUs, CPUs and other products that place increasing demands on system memory and processing speed, require larger power supply units or cooling solutions or that otherwise drive demand for computer cases and other peripherals, or if gamers do not accept those products, our business may be seriously harmed.

We also believe that sales of our gear are driven by conditions in the computer gaming industry. In particular, we believe that our business depends on the introduction and success of computer games with sophisticated graphics that place greater demands on system processing speed and capacity and therefore require more powerful GPUs or CPUs, which in turn drives demand for our DRAM modules, PSUs, cooling systems and other components and peripherals. Likewise, we believe that the continued introduction and market acceptance of new or enhanced versions of computer games helps sustain consumer interest in computer gaming generally. The demand for our gear would likely decline, perhaps substantially, if computer game companies and developers do not introduce and successfully market sophisticated new and improved games that require increasingly high levels of system and graphics processing power on an ongoing basis or if demand for computer games among computer gaming enthusiasts or conditions in the computer gaming industry deteriorate for any reason. As a result, our sales and other operating results fluctuate due to conditions in the market for computer games, and downturns in this market may seriously harm our business.

We face intense competition, and if we do not compete effectively, we could lose market share, demand for our gear could decline and our business may be seriously harmed.

We face intense competition in the markets for all of our gear. We operate in markets that are characterized by rapid technological change, constant price pressure, rapid product obsolescence, evolving industry standards and new demands for features and performance. We experience aggressive price competition and other promotional activities by competitors, including in response to declines in consumer demand and excess product supply or as competitors seek to gain market share.

In addition, because of the continuing convergence of the markets for computing devices and consumer electronics, we expect greater competition in the future from well-established consumer electronics companies. Many of our current and potential competitors, some of which are large, multi-national businesses, have substantially greater financial, technical, sales, marketing, personnel and other resources and greater brand recognition than we have. Our competitors may be in a stronger position to respond quickly to new technologies and may be able to design, develop, market and sell their products more effectively than we can. In addition, some of our competitors are small or mid-sized specialty companies that can react to changes in industry trends or consumer preferences or to introduce new or innovative products more quickly than we can. As a result, our product development efforts may not be successful or result in market acceptance of our gear. Our primary competitors include:

Competitors in the gamer and creator peripherals market. Our primary competitors in the market for gaming keyboards and mice include Logitech and Razer. Our primary competitors in the market for headset and related audio products include Logitech, Razer and HP through its HyperX brand. Our primary competitors in the gamer and creator streaming gear market include Logitech,

12

Table of Contents

following its acquisition of Blue Microphones, and AVerMedia. Our primary competitors in the performance controller market include Microsoft and Logitech.

Competitors in the gaming components and systems market. Our primary competitors in the market for PSUs, cooling solutions and computer cases include Cooler Master, NZXT, EVGA, Seasonic and Thermaltake. Our primary competitors in the market for DRAM modules include G.Skill, Kingston and Micron through its Crucial division. Our primary competitors in the market for prebuilt gaming PCs and laptops include Dell through its Alienware brand, HP through its Omen brand, Asus and Razer. Our primary competitors in the market for custom-built gaming PCs and laptops include iBuypower and Cyberpower.

Competitors in new markets. We are considering introducing new gear for gamers or streamers and content creators and, to the extent we introduce gear in new categories, we will likely experience substantial competition from additional companies, including large computer gaming and streaming peripherals and consumer electronics companies with global brand recognition and significantly greater resources than ours.

Our ability to compete successfully is fundamental to our success in existing and new markets. We believe that the principal competitive factors in our markets include performance, reliability, brand and associated style and image, time to market with new emerging technologies, early identification of emerging opportunities, interoperability of products and responsive customer support on a worldwide basis. If we do not compete effectively, demand for our gear could decline, our net revenue and gross margin could decrease and we could lose market share, which may seriously harm our business.

Further, our ability to successfully compete depends in large part on our ability to compete on price for our high-performance gear. Much of the gear we sell is priced higher than products offered by our competitors. If gamers or streamers are not willing to pay the higher price point for our gear, we will either need to discount our gear or our sales volume could decrease. In either event, our business could be seriously harmed.

If gaming, including streaming and esports, does not grow as expected or declines our business could be seriously harmed.

Over the past two decades, gaming has grown from a relatively niche industry to a significant segment of the global entertainment industry with a wide following across various demographic groups globally. This growth includes, and has been driven by, the rapid expansion of live game streaming by content creators and the growing popularity of professional competitive gaming, also referred to as esports. However, the continued growth of the video gaming industry will depend on numerous factors, many of which are beyond our control, including but not limited to:

We generate a significant portion of our net revenue from gaming-related gear. As a result, any decline or slowdown in the growth of the gaming industry or the declining popularity of the gaming industry could materially and adversely affect our business.

While there were 2.6 billion mobile gamers in 2020, according to Newzoo, we have no specific plans to attract gamers who use only mobile devices or tablets and we have no plans to develop gear specifically designed for gamers who use mobile devices or tablets. As a result, if gamers migrate to mobile devices or tablets and away from PCs and consoles, our business may be seriously harmed. In addition, there can be no assurance that the active demographics in gaming will continue to buy into and drive the growth

13

Table of Contents

in gamer culture and the games industry overall nor can there be any assurance that gaming will expand into new demographics that will drive growth. Further, if gamers’ interest in video games is diminished, this may seriously harm our business.

Our growth prospects are, to a certain extent, connected with the ongoing growth of live game streaming and esports and any reduction in the growth or popularity of live game streaming or esports may seriously harm our business.

The success of our business depends on live game streaming and esports driving significant growth in the high-performance gaming and content streaming market, which could prompt strong growth in the sales of our gear. However, there are a number of factors which could result in the esports or live game streaming markets having limited or negative impact on our sales and overall growth. These factors include:

Further, there are a number of factors which could result in the growth in live game streaming or the esports markets stagnating, or even decreasing. These factors include:

If one or more of the above factors are realized, our business may be seriously harmed.

If we lose or are unable to attract and retain key management, our ability to compete could be seriously harmed and our financial performance could suffer.

Our performance depends to a significant degree upon the contributions of our management team, particularly Andrew J. Paul, our co-founder, Chief Executive Officer and Director. If we lose the services of one or more of our key executives, we may not be able to successfully manage our business, meet competitive challenges or achieve our growth objectives. To the extent that our business grows, we will need to attract and retain additional qualified management personnel in a timely manner, and we may not be able to do so.

We rely on highly skilled personnel and if we are unable to attract, retain or motivate key personnel or hire qualified personnel our business may be seriously harmed.

Our performance is largely dependent on the talents and efforts of highly skilled individuals, particularly our marketing personnel, sales force, electrical engineers, mechanical engineers and computer professionals. Our future success depends on our continuing ability to identify, hire, develop, motivate and retain highly skilled personnel and, if we are unable to hire and train a sufficient number of qualified employees for any reason, we may not be able to implement our current initiatives or grow, or our business may contract and we may lose market share. Moreover, certain of our competitors or other technology businesses may seek to hire our employees. There can be no assurance that our stock-based and other compensation will provide adequate incentives to attract, retain and motivate employees in the future, particularly if the market price of our common stock does not increase or declines. If we do not succeed in attracting, retaining and motivating highly qualified personnel, our business may be seriously harmed. Further, we also face significant competition for employees, particularly in the San Francisco Bay Area where our headquarters are located, and as a result, skilled employees in this competitive geographic location can often command higher compensation and may be

14

Table of Contents

difficult to hire. In addition, recent political and military events in Ukraine, poor relations between the United States and Russia, and sanctions by the United States and the European Union against Russia could have an adverse impact on our research and development efforts as we maintain significant research and development operations in Ukraine.

Currency exchange rate fluctuations could result in our gear becoming relatively more expensive to our overseas customers or increase our manufacturing costs, each of which may seriously harm our business.

Our international sales and our operations in foreign countries subject us to risks associated with fluctuating currency exchange rates. Because sales of our gear is denominated primarily in U.S. dollars, an increase in the value of the U.S. dollar relative to the currency used in the countries where our gear is sold may result in an increase in the price of our gear in those countries, which may lead to a reduction in sales. Likewise, because we pay our suppliers and third-party manufacturers, most of which are located outside of the United States, primarily in U.S. dollars, any decline in the value of the U.S. dollar relative to the applicable local currency, such as the Chinese Renminbi or the New Taiwan dollar, may cause our suppliers and manufacturers to raise the prices they charge us. In addition, we generally pay our employees located outside the United States in the local currency and, as a result of our foreign sales and operations, we have other expenses, assets and liabilities that are denominated in foreign currencies and changes in the value of the U.S. dollar could result in significant increases in our expenses that may seriously harm our business.

Total unit shipments of our gear have historically been higher during the third and fourth quarters of the year. As a result, our sales may be subject to seasonal fluctuations, which may seriously harm our business.

Since 2020, our revenue seasonality has been impacted positively and negatively, and thus has not followed historic patterns, by external events, such as shelter-in-place restrictions, global supply chain and logistics issues and availability of affordable GPUs, primarily caused by the COVID-19 pandemic. Historically, prior to 2020, we have experienced and expect to continue to experience seasonal fluctuations in sales due to the spending patterns of gamers who purchase our gear. Our total unit shipments have generally been lowest in the first and second calendar quarters due to lower sales following the fourth quarter holiday season and because of the decline in sales that typically occurs in anticipation of the introduction of new or enhanced GPUs, CPUs and other computer hardware products, which usually takes place in the second calendar quarter, and which tends to drive sales in the following two quarters. As a consequence of seasonality, our total unit shipments for the second calendar quarter are generally the lowest of the year, followed by total unit shipments for the first calendar quarter. As a result, our total unit shipments are subject to seasonal fluctuations, which may seriously harm our business. Historical seasonal patterns may not continue in the future and have been impacted, and may be further impacted in the future, by increasing supply constraints, GPU shortages, shifts in customer behavior and the evolving impacts of the COVID-19 pandemic.

Our results of operations are subject to substantial quarterly and annual fluctuations, which may adversely affect the market price of our common stock.

Our results of operations have in the past fluctuated, sometimes substantially, from period to period, and we expect that these fluctuations will continue. A number of factors, many of which are outside our control, may cause or contribute to significant fluctuations in our quarterly and annual net revenue and other operating results. These fluctuations may make financial planning and forecasting more difficult. In addition, these fluctuations may result in unanticipated decreases in our available cash, which could negatively impact our business. These fluctuations also could both increase the volatility and adversely affect the market price of our common stock. There are numerous factors that may cause or contribute to fluctuations in our operating results. As discussed below, these factors may relate directly to our business or may relate to technological developments and economic conditions generally.

Factors affecting our business and markets. Our result of operations may be materially adversely affected by factors that directly affect our business and the competitive conditions in our markets, including the following:

15

Table of Contents

General economic conditions. Our business may be materially adversely affected by factors relating to global, national and regional economies, including:

Technological factors. In addition to technological developments directly relating to our gear, more generalized changes in technology may have a significant effect on our operating results. For example, our business could be seriously harmed by rapid, wholesale changes in technology in or affecting the markets in which we compete or widespread adoption of cloud computing.

One or more of the foregoing or other factors may cause our expenses to be disproportionately higher or lower or may cause our net revenue and other operating results to fluctuate significantly in any particular quarterly or annual period. Our results of operations in one or more future quarters or years may fail to meet the expectations of investment research analysts or investors, which could cause an immediate and significant decline in the market price of our common stock.

16

Table of Contents

Cloud computing may seriously harm our business.

Cloud computing refers to a computing environment in which software is run on third-party servers and accessed by end-users over the internet. In a cloud computing environment a user’s computer may be a so-called “dumb terminal” with minimal processing power and limited need for high-performance components. Through cloud computing, gamers will be able to access and play graphically sophisticated games that they may not be able to otherwise play on a PC that is not fully equipped with the necessary, and often expensive, hardware. If cloud computing is widely accepted, the demand for high-performance computer gaming hardware products such as the PC high-performance memory, prebuilt and custom gaming PCs and laptops, and other PC gaming components we sell, could diminish significantly. As a result, if cloud computing gaming were to become widely adopted, such adoption could seriously harm our business.

Conditions in the retail and consumer electronics markets may significantly affect our business and could have an adverse effect on our net revenue.

We derive most of our revenue from higher priced gear sold through online and brick-and-mortar retailers to gamers, and we are vulnerable to declines in consumer spending due to, among other things, depressed economic conditions, reductions in disposable income and other factors that affect the retail and consumer electronics markets generally. In addition, our revenues are attributable to sales of high-performance gamer and creator peripherals and gaming components and systems, all of which are products that are geared to the computer gaming market which, like other consumer electronic markets, is susceptible to the adverse effects of poor economic conditions.

Other significant negative effects could include limited growth or reductions in worldwide sales of products that incorporate DRAM modules, such as PCs, smartphones and servers, resulting in excess supply in the worldwide DRAM market and reduced demand for our gear from our customers as they limit or lower their spending and inventory levels. Adverse economic conditions may also reduce our cash flow due to delays in customer payments, increase the risk of customer bankruptcy or business failures and result in increases in bad debt write-offs and receivables reserves.

Other negative effects on our business resulting from adverse economic conditions worldwide may include:

Depressed economic conditions, whether in our key regional markets or globally, could result in a decline in both product prices and the demand for our gear, which may seriously harm our business.

Our sponsorship of individuals, teams and events within the gaming community is subject to numerous risks that may seriously harm our business.

We interact with the gaming community in numerous ways, including through the sponsorship of streamers, esports events, tournaments, esports athletes and teams. These sponsored events and individuals are associated with our brand and represent our commitment to the gaming community. There can be no assurance that we will be able to maintain our existing relationships with any of our sponsored individuals or teams in the future or that we will be able to attract new highly visible gamers to endorse our gear. Additionally, certain individuals or teams with greater access to capital may increase the cost of certain sponsorships to levels we may choose not to match. If this were to occur, our sponsored individuals, teams or events may terminate their relationships with us and endorse our competitors’ products, and we may be unable to obtain endorsements from other comparable alternatives. In addition, if any of our sponsored individuals or teams become unpopular or engage in activities perceived negatively in the gaming community or more broadly, our sponsorship expenditures could be wasted and our brand reputation could be damaged which, in turn, could seriously harm our business.

17

Table of Contents

DRAM integrated circuits account for most of the cost of producing our DRAM modules and fluctuations in the market price of DRAM integrated circuits may have a material impact on our net revenue and gross profit.

DRAM integrated circuits, or ICs, account for most of the cost of producing our DRAM modules. The market for these ICs is highly competitive and cyclical. Prices of DRAM ICs have historically been subject to volatility over relatively short periods of time due to a number of factors, including imbalances in supply and demand. We expect these fluctuations will recur in the future, which could seriously harm our business. For example, changes in the selling prices of our DRAM modules can have a substantial impact on our net revenue as our performance memory products represents a significant portion of our overall net revenue. In addition, declines in the market price of ICs enable our competitors to lower prices and we will likely be forced to lower our product prices in order to compete effectively which could have an adverse effect on our net revenue. Further, because we carry inventory of DRAM ICs and DRAM modules at our facility in Taiwan, fluctuations in the market price of these ICs can have an effect on our gross margin. For example, declines in the prices of these ICs and their related products have tended to have a negative short-term impact on gross margin of our DRAM modules. In addition, selling prices of our DRAM modules, on the one hand, and market prices of DRAM ICs, on the other hand, may rise or fall at different rates, which may also affect our gross margin. Any of these circumstances could materially adversely affect our net revenue and gross margins.

We use DRAM ICs produced by Samsung, Micron and Hynix in our DRAM modules. We purchase those DRAM ICs, pursuant to purchase orders and not long-term supply contracts, largely from third-party distributors and, to a lesser extent, directly from those manufacturers. According to the most recent external market share data for the year ended December 31, 2021, DRAM IC manufacturers, Samsung, a manufacturer of DRAM ICs, had an approximately 43% share of the worldwide DRAM IC market, compared to approximately 28% for Hynix and approximately 23% for Micron in each case for the same period. However, should supply from any of these vendors be limited, there can be no assurance that we would be able to meet our needs by purchasing DRAM ICs produced by other manufacturers or from agents and distributors. Further, there are a limited number of companies capable of producing the high-speed DRAM ICs required for our high-performance DRAM modules, and any inability to procure the requisite quantities and quality of DRAM ICs could reduce our production of DRAM modules and could seriously harm our business.

The coronavirus outbreak has had, and could continue to have, a materially disruptive effect on our business.

The COVID-19 disease has spread globally and has resulted in authorities implementing numerous measures to try to contain the virus, such as travel bans and restrictions, quarantines, shelter-in-place orders and shutdowns. For example, starting in mid-March 2020, the governor of California, where our headquarters are located, issued shelter-in-place orders restricting non-essential activities, travel and business operations for an indefinite period of time, subject to certain exceptions for necessary activities. Such orders or restrictions have resulted in our headquarters closing, work stoppages, slowdowns and delays, travel restrictions and cancellation of events, among other effects, thereby negatively impacting our operations.

The spread of COVID-19 has and could continue to seriously harm our business. Current and potential impacts include, but are not limited to, the following:

Since early 2020, we have experienced some business disruptions due to COVID-19, including the stoppage in our factories in early 2020, disruption in our supply chain and increased distribution costs such as the elevated ocean freight costs we incurred in the second half of 2021, which led to increases in operating costs. As a result of the COVID-19 pandemic, we are continuing to experience logistics challenges globally. These negative financial impacts have been offset by strong revenue growth year-over-year

18

Table of Contents

partly due to an increase in demand for our gear as more people are under shelter-in-place restrictions, which we believe have limited people’s access to alternative forms of entertainment and social interaction, and thus have increased the demand for home entertainment and connecting with others through content creation. In contrast, as the COVID-19 pandemic subsides, it has, and could continue to, result in shelter-in-place and other similar restrictions being eased. Such easing of restrictions likely has, and will continue to, result in consumers returning to other alternative forms of entertainment and interaction. This in turn has, and could continue to, result in a decline in demand for our products.

The extent to which the COVID-19 outbreak, including the spread of more contagious and deadly variants, ultimately impacts our business, results of operations, cash flows and financial condition will depend on future developments, which are highly uncertain and cannot be predicted, including, but not limited to, the duration and spread of the outbreak, its severity, the actions to contain the virus or treat its impact, and how quickly and to what extent normal economic and operating conditions can resume. Even after the COVID-19 outbreak has subsided, we may continue to experience significant impacts to our business as a result of its global economic impact, including any economic downturn or recession that has occurred or may occur in the future.

A significant portion of our net revenue is generated by sales of DRAM modules and any significant decrease in the average selling prices of our DRAM modules would seriously harm our business.

A significant percentage of our net revenue is generated by sales of DRAM modules. In particular, net revenue generated by sales of DRAM modules accounted for a total of 28.5% and 32.9% of our net revenue in 2021 and 2020, respectively. As a result, any significant decrease in average selling prices of our DRAM modules, whether as a result of declining market prices of DRAM ICs or for any other reason, would seriously harm our business. Selling prices for our DRAM modules tend to increase or decrease with increases or decreases, respectively, in market prices of DRAM ICs.

Sales to a limited number of customers represent a significant portion of our net revenue, and the loss of one or more of our key customers may seriously harm our business.

In 2021 and 2020, sales to Amazon accounted for 26.7% and 24.6% of our net revenue, respectively. Sales to our ten largest customers accounted for 51.7% and 52.7% of the same periods, respectively, of our net revenue. Our customers typically do not enter into long-term agreements to purchase our gear but instead enter into purchase orders with us from time to time. These purchase orders may generally be cancelled and orders can be reduced or postponed by the customer. In addition, our customers are under no obligation to continue purchasing from us and may purchase similar products from our competitors, and some of our customer agreements contain “most favored nation” clauses. Further, while we maintain accounts receivables insurance for many of our customers, we do not maintain such coverage for Amazon and others. As a result, if either Amazon or others were to default on its payment to us, we would not be covered by such insurance, and our business may be seriously harmed. If the financial condition of a key customer weakens, if a key customer stops purchasing our gear, or if uncertainty regarding demand for our gear causes a key customer to reduce their orders and marketing of our gear, our business could be seriously harmed. A decision by one or more of our key customers to reduce, delay or cancel its orders from us, either as a result of industry conditions or specific events relating to a particular customer or failure or inability to pay amounts owed to us in a timely manner, or at all, may seriously harm our business. In addition, because of our reliance on key customers, the loss of one or more key customers as a result of bankruptcy or liquidation or otherwise, and the resulting loss of sales, may seriously harm our business. Additionally, some of our customer agreements contain “most favored nation” clauses.

We have limited manufacturing facilities that only assemble our DRAM modules, custom built PCs, custom cooling and controllers, we have no guaranteed sources of supply of products or components and we depend upon a small number of manufacturers, some of which are exclusive or single-source suppliers, to supply our gear, each of which may result in product or component shortages, delayed deliveries and quality control problems.

We maintain limited manufacturing facilities that only assemble DRAM modules, custom built PCs, custom cooling and performance controllers, and as a result, we depend entirely upon third parties to manufacture and supply the gear we sell and the components used in our gear such as gaming peripherals and gaming components. Our gear that is manufactured by outsourced parties is generally produced by a limited number of manufacturers and in some instances is purchased on a purchase order basis. For example, each model of our gaming keyboards, gaming mice, gaming headsets, computer cases, PSUs and cooling solutions is produced by a single manufacturer. We do not have long-term supply agreements with some of our manufacturers and suppliers. In addition, we carry limited inventory of our gear, and the loss of one or more of these manufacturers or suppliers, or a significant decline in production or deliveries by any of them, could significantly limit our shipments of gear or prevent us from shipping that gear entirely.

19

Table of Contents

Our reliance upon a limited number of manufacturers and suppliers exposes us to numerous risks, including those described below.

Risks relating to production and manufacturing. Our business could be seriously harmed if our manufacturers or suppliers ceased or reduced production or deliveries, raised prices, lengthened production or delivery times or changed other terms of sale. In particular, price increases by our manufacturers or suppliers could seriously harm our business if we are unable to pass those price increases along to our customers. Further, the supply of products from manufacturers and suppliers to us could be interrupted or delayed, and we may be unable to obtain sufficient quantities of our products because of factors outside of our control. For example, our manufacturers and suppliers may experience financial difficulties, be affected by natural disasters or pandemics, have limited production facilities or manufacturing capacity, may experience labor shortages or may be adversely affected by regional unrest or military actions, such as the recent tensions between Russia and Ukraine. In addition, we may be slower than our competitors in introducing new products or reacting to changes in our markets due to production or delivery delays by our third-party manufacturers or suppliers. Likewise, lead times for the delivery of products being manufactured for us can vary significantly and depend on many factors outside of our control, such as demand for manufacturing capacity and availability of components. In addition, if one of our exclusive or single-source manufacturers were to stop production, or experience product quality or shortage issues, we may be unable to locate or engage a suitable replacement on terms we consider acceptable and, in any event, there would likely be significant delays before we were able to transition production to a new manufacturer and potentially significant costs associated with that transition.

Risks relating to product quality. Our manufacturers or suppliers may provide us with products or components that do not perform reliably or do not meet our quality standards or performance specifications or are susceptible to early failure or contain other defects. This may seriously harm our reputation, increase our warranty and other costs or lead to product returns or recalls, any of which may seriously harm our business.

Risks relating to product and component shortages. From time to time we have experienced product shortages due to both disruptions in supply from the third parties that manufacture or supply our gear and our inability or the inability of these third-party manufacturers to obtain necessary components, and we may experience similar shortages in the future. Moreover, procurement of the other components used in our gear is generally the responsibility of the third parties that manufacture our gear, and we therefore have limited or no ability to control or influence the procurement process or to monitor the quality of components.

Any disruption in or termination of our relationships with any of our manufacturers or suppliers or our inability to develop relationships with new manufacturers or suppliers as and when required would cause delays, disruptions or reductions in product shipment and may require product redesigns, all of which could damage relationships with our customers, seriously harm our brand, increase our costs and otherwise seriously harm our business. Likewise, shortages or interruptions in the supply of products or components, or any inability to procure these products or components from alternate sources at acceptable prices in a timely manner, could delay shipments to our customers and increase our costs, any of which may seriously harm our business.

If our proprietary iCUE software or Elgato streaming software suite have any “bugs” or glitches, or if we are unable to update the iCUE software or Elgato streaming software suite to incorporate innovations, our business may be seriously harmed.

Because most of the gear we sell is linked through either our iCUE software or our Elgato streaming software suite, “bugs” or other glitches in the software may cause it to not perform reliably, meet our quality standards or meet performance specifications. Further, even if we detect any bugs or other glitches in the iCUE software or our Elgato streaming software suite we may be unable to update the affected software effectively to remediate these problems. In addition, in order for us to stay competitive, we need to update the iCUE software, Elgato streaming software suite and any other software utilized by our gear, to incorporate innovations and other changes to address gamers and content creators’ changing needs. If we are unable to update the iCUE software or our Elgato streaming software suite to include such updates or address any bugs or glitches, its use to gamers and content creators may be substantially diminished, which could seriously harm our business.

The need to continuously develop new gear and product improvements increases the risk that our gear will contain defects or fail to meet specifications, which may increase our warranty costs and product returns, lead to recalls of gear, damage our reputation and seriously harm our business.

Gear that does not meet specifications or that contains, or is perceived by our customers or gamers to contain, defects could impose significant costs on us or seriously harm our business. Our gear may suffer from design flaws, quality control problems in the manufacturing process or components that are defective or do not meet our quality standards. Moreover, the markets we serve are characterized by rapidly changing technology and intense competition and the pressure to continuously develop new gear and improvements and bring that gear and improvements to market quickly heightens the risks that our gear will be subject to both quality

20

Table of Contents

control and design problems. Because we largely rely on third parties to manufacture our gear and the components that are used in our gear, our ability to control the quality of the manufacturing process and the components that are used to manufacture our gear is limited. Product quality issues, whether as a result of design or manufacturing flaws or the use of components that are not of the requisite quality or do not meet our specifications, could result in product recalls, product redesign efforts, lost revenue, loss of reputation, and significant warranty and other expenses. In that regard, we have previously voluntarily recalled the SF-series PSUs. Recalls of gear and warranty-related issues can be costly, cause damage to our reputation and result in increased expenses, lost revenue and production delays. We may also be required to compensate customers for costs incurred or damages caused by defective gear. If we incur warranty or product redesign costs, institute recalls of gear or suffer damage to our reputation as a result of defective gear, our business could be seriously harmed.

While we operate a facility in Taiwan that assembles, tests and packages all of our DRAM modules and certain other products, we rely upon manufacturers in China and Southeast Asia to produce a significant portion of our other products, which exposes us to risks that may seriously harm our business.

We operate a facility in Taiwan that assembles, tests, packages and ultimately supplies all of our DRAM modules and a significant portion of our cooling solutions, prebuilt and custom gaming systems and custom gaming controllers. We also assemble, test, package and ultimately supply our custom-built PCs in our U.S. facility, and our customized gaming controllers in our U.S. and U.K. facilities. All of the other gear we sell, including the components used to assemble our DRAM modules, are produced at factories operated by third parties located in China, Taiwan and countries in Southeast Asia. The fact that all of these facilities, manufacturers, suppliers and factories are concentrated in China, Taiwan and countries in Southeast Asia exposes us to numerous risks.

We believe one of the most significant risks associated with this concentration is that production may be interrupted or limited because of labor shortages in southern China and by strains on the local infrastructure. In addition, production at facilities located in China, Taiwan or Southeast Asia, including our own manufacturing, testing and packaging facility in Taiwan, and deliveries from those facilities, may be adversely affected by tensions, hostilities or trade disputes involving China, Taiwan, the United States or other countries. There is considerable potential political instability in Taiwan related to its disputes with China. In addition, political instability in countries in Southeast Asia where we source certain components, such as Thailand, could result in delays in shipments or our inability to source certain critical components for our products. Although we do not do business in North Korea, any future increase in tensions between South Korea and North Korea, such as an outbreak or escalation of military hostilities, or between Taiwan and China could materially adversely affect our operations in Asia or the global economy, which in turn may seriously harm our business.

Other risks resulting from this concentration of our manufacturing facilities and our suppliers in China, Taiwan and Southeast Asia include the following:

In addition, if significant tariffs or other restrictions are placed on Chinese imports or any related counter-measures are taken by China, our business may be seriously harmed if such tariffs or counter-measures affect the manufacturing costs of any of our gear. Further, such tariffs could adversely impact our gross profits if we cannot pass the increased costs incurred as a result of these tariffs through to our consumers, or if the resulting increased prices result in a decrease in consumer demand.

The occurrence of any one or more of these risks may seriously harm our business.

If we do not successfully coordinate the worldwide manufacturing and distribution of our gear, we could lose sales.

Our business requires that we coordinate the manufacturing and distribution of our gear over a significant portion of the world. We rely upon third parties to manufacture our gear and to transport and distribute our gear to our customers. If we do not successfully coordinate the timely and efficient manufacturing and distribution of our gear, our costs may increase, we may experience a build-

21

Table of Contents

up in inventory, we may not be able to deliver sufficient quantities to meet customer demand and we could lose sales, each of which could seriously harm our business.

Our operating results are particularly sensitive to freight costs, and our costs may increase significantly if we are unable to ship and transport finished products efficiently and economically across long distances and international borders, which may seriously harm our business.

The majority of our gear is manufactured in Asia, and we transport significant volumes of finished products across long distances and international borders. As a result, our operating results can be significantly affected by changes in transportation costs. In that regard, although we ship our DRAM modules, which have selling prices that are relatively high compared to their size and weight, by air, we generally use ocean freight to ship our other products because of their relatively low selling prices compared to their size and weight. If we underestimate the demand for any of the products we ship by ocean freight, or if deliveries of those products to us by our manufacturers are delayed or interrupted, we may be required to ship those products by air in order to fill orders on a timely basis. Shipping larger or heavier items, such as cases or PSUs, by air is significantly more expensive than using ocean freight. As a result, any requirement that we ship these products by air, whether because we underestimate demand or because of an interruption in supply from the manufacturers who produce these products or for any other reason, could materially increase our costs. In addition, freight rates can vary significantly due to large number of factors beyond our control, including changes in fuel prices or general economic conditions or the threat of terrorist activities or acts of piracy. If demand for air or ocean freight should increase substantially, it could make it difficult for us to procure sufficient cargo transportation space at prices we consider acceptable, or at all. Increases in our freight expenses, or any inability to ship our gear as and when required, may seriously harm our business.

Because our gear must cross international borders, we are subject to risk of delay if our documentation does not comply with customs rules and regulations or for similar reasons. In addition, any increases in customs duties or tariffs, as a result of changes to existing trade agreements between countries or otherwise, could increase our costs or the final cost of our gear to our retailer customers or gamers or decrease our margins. The laws governing customs and tariffs in many countries are complex, subject to many interpretations and often include substantial penalties for non-compliance.

Our effective tax rate may increase in the future, including as a result of tax legislation changes, which may have a material adverse effect on our business, financial condition and results of operations.

Our effective tax rate may be impacted by changes in or interpretations of tax laws in any given jurisdiction, utilization of or limitations on our ability to utilize any tax credit carry-forwards, changes in geographical allocation of revenue and expense and changes in management’s assessment of matters such as our ability to realize the value of deferred tax assets.

In particular, the U.S. government may enact significant changes to the taxation of business entities including, among others, an increase in the corporate income tax rate, the imposition of minimum taxes or surtaxes on certain types of income, significant changes to the taxation of income derived from international operations, and an addition of further limitations on the deductibility of business interest. While certain draft legislation has been publicly released and is under development in Congress at this time, the likelihood of these changes being enacted or implemented is unclear.

Our effective tax rate could also increase due to several factors, including:

In the past, we have experienced fluctuations in our effective income tax rate which reflects a variety of factors that may or may not be present in any given year. In light of these factors, there can be no assurance that our effective income tax rate will not change in future periods. Accordingly, if our effective tax rate were to increase, it may have a material adverse effect on our business, financial condition and results of operations.

22

Table of Contents

Our ability to utilize our net operating losses, or NOLs, carryforwards and certain other tax attributes may be limited.

Our ability to utilize our NOL carryforwards to offset potential future taxable income and related income taxes that would otherwise be due is dependent upon our generation of future taxable income before the expiration dates of the NOL carryforwards, and we cannot predict with certainty when, or whether, we will generate sufficient taxable income to use all of our NOL carryforwards.

Under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, or the Code, if a corporation undergoes an “ownership change,” generally defined as a greater than 50 percentage point change (by value) in its equity ownership by certain stockholders over a three-year period, the corporation’s ability to use its pre-change NOL carryforwards and other pre-change tax attributes (such as research and development tax credits) to offset its post-change income or taxes may be limited. We have experienced ownership changes in the past, and we may experience ownership changes in the future and/or subsequent shifts in our stock ownership (some of which may be outside our control). As a result, if we earn net taxable income, our ability to use our pre-change NOL carryforwards to offset U.S. federal taxable income may be subject to limitations under Section 382, which could potentially result in increased future tax liability to us. In addition, at the state level, there may be periods during which the use of NOL carryforwards is suspended or otherwise limited, which could accelerate or permanently increase state taxes owed.

Technological developments or other changes in our industry could render our gear less competitive or obsolete, which may seriously harm our business.

Our industry is characterized by rapidly evolving technology and standards. These technological developments require us to integrate new technology and standards into our gear, create new and relevant categories of gear and adapt to changing business models in a timely manner. Our competitors may develop or acquire alternative and competing technologies and standards that could allow them to create new and disruptive products or produce similar competitive products at lower costs of production. Advances in the development of gaming, computing and audiovisual technology could render our gear less competitive or obsolete. For example, the emergence of augmented reality and virtual reality headsets could render certain of our gamer and creator peripherals such as keyboards and mice less relevant, similar to how cloud computing could drastically reduce the need for gaming components and systems. If we are unable to provide new gear for augmented or virtual reality devices or to address other technological trends, our business may be seriously harmed. In addition, government authorities and industry organizations may adopt new standards that apply to our gear. As a result, we may need to invest significant resources in research and development to maintain our market position, keep pace with technological changes and compete effectively. Our product development expenses were $60.3 million and $50.1 million for 2021 and 2020, respectively, representing 3.2% and 2.9% of our net revenue for these periods, respectively. Our failure to improve our gear, create new and relevant categories of gear and adapt to changing business models in a timely manner may seriously harm our business.

In addition, recent political and military events in Ukraine, poor relations between the United States and Russia, and sanctions by the United States and the European Union against Russia could have an adverse impact on our research and development efforts as we maintain significant research and development operations in Ukraine.

We order most of our gear from third-party manufacturers based on our forecasts of future demand and targeted inventory levels, which exposes us to the risk of both product shortages, which may result in lost sales and higher expenses, and excess inventory, which may require us to sell our gear at substantial discounts and lead to write-offs.

We depend upon our product forecasts to make decisions regarding investments of our resources and production levels of our gear. Because of the lead time necessary to manufacture our gear and the fact that we usually have little or no advance notice of customer orders, we must order our gear from third-party manufacturers and therefore commit to substantial purchases prior to obtaining orders for those products from our customers. This makes it difficult for us to adjust our inventory levels if orders fall below our expectations. Our failure to predict low demand for product can result in excess inventory, as well as lower cash flows and lower margins if we were unable to sell a product or if we were required to lower product prices in order to reduce inventories, and may also result in inventory write-downs. In addition, the cancellation or reduction of orders by our customers may also result in excess inventory. On the other hand, if actual orders exceed our expectations, we may need to incur additional costs, such as higher shipping costs for air freight or other expedited delivery or higher product costs for expedited manufacturing, in order to deliver sufficient quantities of products to meet customer orders on a timely basis or we may be unable to fill some orders altogether. In addition, many of the types of gear we sell have short product life cycles, so a failure to accurately predict and meet demand for products can result in lost sales that we may be unable to recover in subsequent periods. These short life cycles also make it more likely that slow moving or excess inventory may become obsolete, requiring us to sell our gear at significant discounts or write off entirely excess or obsolete inventory. Any failure to deliver gear in quantities sufficient to satisfy demand can also seriously harm our reputation with both our retailer customers and end-consumers.

23

Table of Contents

Over the past few years, we have expanded the number and type of gear we sell, and the geographic markets in which we sell them, and we will endeavor to further expand our product portfolio and sales reach. The growth of our product portfolio and the markets in which we sell our gear has increased the difficulty of accurately forecasting product demand. We have in the past experienced significant differences between our forecasts and actual demand for our gear and expect similar differences in the future. If we do not accurately predict product demand, our business may be seriously harmed.

Order cancellations, product returns, price erosion, product obsolescence and retailer and distributor customer and gamer incentive programs may result in substantial inventory and/or receivables write-downs and seriously harm our business.

The gear we sell is characterized by rapid technological change and short product life cycles. As a result, the gear that we hold in inventory may be subject to significant price erosion or may become obsolete, requiring inventory write-downs. We may experience excess or unsold inventory for a number of reasons, including demand for our gear being lower than our forecasts, order cancellations by our customers and product returns.

In that regard, rights to return products vary by customer and range from the right to return defective products to limited stock rotation rights allowing the exchange of a limited percentage of the customer’s inventory for new product purchases. If the estimated market values of products held in our finished goods and work in process inventories at the end of any fiscal quarter are below our cost of these products, we will recognize charges to write down the carrying value of our inventories to market value.

In addition, we provide a variety of rebates to both customers and gamers, including instant rebates, volume incentive rebates, back end rebates and mail-in rebates. We also have contractual agreements and cooperative marketing, promotional and other arrangements that provide rebates and other financial incentives to our retailer customers and gamers. To a limited extent, we also offer financial incentives related to retailer customer inventory of specific products. The aggregate amount of charges incurred as a result of all of these rebates and other financial incentives is offset from our gross revenue. For 2021 and 2020, our gross revenue was reduced approximately by 8% and 6%, respectively, as a result of these rebates. In the future, we also may be required to write down inventory or receivables due to product obsolescence or because of declines in market prices of our gear. Any write-downs or offsets could seriously harm our business.

Our indemnification obligations to our customers and suppliers for intellectual property infringement claims could require us to pay substantial amounts and may seriously harm our business.

We indemnify a limited number of retailer customers for damages and costs which may arise if our gear infringe third-party patents or other proprietary rights. We may periodically have to respond to claims and litigate these types of indemnification obligations. Any such indemnification claims could require us to make substantial settlement, damages or royalty payments or result in our incurring substantial legal costs. Our insurance does not cover intellectual property infringement. The potential amount of future payments to defend lawsuits or settle or otherwise satisfy indemnified claims under any of these indemnification provisions may be unlimited. We also have replacement obligations for product warranty claims relating to our gear. Our insurance does not cover such claims. Claims for intellectual property infringement and product warranty claims may seriously harm our business.

From time to time, we pay licensing fees in settlement of certain intellectual property infringement claims made by third parties. There can be no assurance that licensing fees paid under these circumstances will not seriously harm our business.

If we are unable to integrate our gear and proprietary software with third-party hardware, operating system software and other products, the functionality of our gear would be adversely affected, which may seriously harm our business.

The functionality of some of our gear depends on our ability to integrate that gear with the hardware, operating system software and related products of providers such as Intel, AMD, NVIDIA, Microsoft, Sony and Asus, among others. We rely to a certain extent on the relationships we have with those companies in developing our gear and resolving issues. There can be no assurance that those relationships will be maintained or that those or other companies will continue to provide the necessary information and support to allow us to develop gear that integrates with their products or that third party developers will continue to develop plugins for and integrations with our proprietary software. If integration with the products of those or other companies becomes more difficult, our gear would likely be more difficult to use or may not be compatible with key hardware, operating systems or other products, which would seriously harm our reputation and the utility and desirability of our gear, and, as a result, would seriously harm our business.

24

Table of Contents

One of our strategies is to grow through acquisitions, which could result in operating difficulties, dilution to our stockholders and other seriously harmful consequences.

One of our strategies is to grow through acquisitions and we may also seek to grow through other strategic transactions such as alliances and joint ventures. In particular, we believe that our future growth depends in part on our ability to enhance our existing product lines and introduce new gear and categories of gear through acquisitions and other strategic transactions. There is substantial competition for attractive acquisitions and other strategic transactions, and we may not be successful in completing any such acquisitions or other strategic transactions in the future. Acquisitions may be particularly challenging during the COVID-19 pandemic. For example, we will likely not be able to travel to conduct in-person meetings and due diligence sessions with potential target companies. If we are successful in making any acquisition or strategic transaction, we may be unable to integrate the acquired business effectively or may incur unanticipated expenditures, which could seriously harm our business. The COVID-19 pandemic may make integration of these businesses even more difficult. Acquisitions and strategic transactions can involve a wide variety of risks depending upon, among other things, the specific business or assets being acquired or the specific terms of any transaction.

In addition, we may finance acquisitions or investments, strategic partnerships or joint ventures by issuing common stock, which may be dilutive to our stockholders, or by incurring indebtedness, which could increase our interest expense and leverage, perhaps substantially. Acquisitions and other investments may also result in charges for the impairment of goodwill or other acquired assets. Acquisitions of, or alliances with, technology companies are inherently risky, and any acquisitions or investments we make, or alliances we enter into, may not perform in accordance with our expectations. Accordingly, any of these transactions, if completed, may not be successful and may seriously harm our business.

In addition, foreign acquisitions or strategic transactions with foreign partners involve additional risks, including those related to integration of operations across different geographies, cultures and languages, as well as risks related to fluctuation in currency exchange rates and risks associated with the particular economic, political and regulatory environment in specific countries.

We need substantial working capital to operate our business, and we rely to a significant degree upon credit extended by our manufacturers and suppliers and borrowings under our revolving credit facility to meet our working capital needs. If we are unable to meet our working capital needs, we may be required to reduce expenses or product purchases, or delay the development, commercialization and marketing of our gear, which would seriously harm our business.

We need substantial working capital to operate our business. We rely to a significant degree upon credit extended by many of our manufacturers and suppliers in order to meet our working capital needs. Credit terms vary from vendor to vendor but typically allow us zero to 120 days to pay for the products. However, notwithstanding the foregoing, there are instances when we are required to pay for gear in advance of it being manufactured and delivered to us. We may also utilize borrowings under our revolving credit facility to provide working capital, and access to external debt financing has historically been and will likely continue to be very important to us. As a result of any downturn in general economic conditions or conditions in the credit markets or other factors, manufacturers and suppliers may be reluctant to provide us with the same credit that they have in the past, which would require that we increase the level of borrowing under our revolving credit facility or obtain other external financing to provide for our substantial working capital needs. Additional financing may not be available on terms acceptable to us or at all. In particular, our access to other debt financing is limited by the negative covenant in our credit agreement restricting our ability to incur other indebtedness, as well as the financial covenants therein prohibiting our Consolidated Total Net Leverage Ratio from exceeding 3.0 to 1.0 or our Consolidated Interest Coverage Ratio being less than 3.0 to 1.0 (both tested quarterly on a trailing four fiscal quarter basis). As a result, such restrictions could limit, perhaps substantially, the amount of indebtedness we are permitted to borrow under other debt arrangements.

To the extent we are required to use additional borrowings under our revolving credit facility or from other sources (if available and if permitted by the credit facility) to provide working capital, it could increase our interest expense and expose us to other risks of leverage. Any inability to meet our working capital or other cash needs as and when required would likely seriously harm our business, results of operations and financial condition and adversely affect our growth prospects and stock price and could require, among other things, that we reduce expenses, which might require us to reduce shipments of our gear or our inventory levels substantially or to delay or curtail the development, commercialization and marketing of our gear.

Indebtedness and the terms of our credit facilities may impair our ability to respond to changing business and economic conditions and may seriously harm our business.

We had $247.7 million of indebtedness as of December 31, 2021. We have incurred significant indebtedness under our credit facilities to fund working capital and other cash needs and we expect to incur additional indebtedness in the future, particularly if we use borrowings or other debt financing to finance all or a portion of any future acquisitions. In addition, the terms of our credit facilities require, and any debt instruments we enter into in the future may require, that we comply with certain restrictions and

25

Table of Contents

covenants. These covenants and restrictions, as well as any significant increase in our indebtedness, could adversely impact us for a number of reasons, including the following:

Cash flow required to pay debt service. We may be required to dedicate a substantial portion of our available cash flow to debt service. This risk is increased by the fact that borrowings under our credit facilities bear interest at a variable rate. This exposes us to the risk that the amount of cash required to pay interest under our credit facilities will increase to the extent that market interest increases. Our indebtedness and debt service obligations may also increase our vulnerability to economic downturns and adverse competitive and industry conditions.

Adverse effect of financial and other covenants. The covenants and other restrictions in our credit facilities and any debt instruments we may enter into in the future may limit our ability to raise funds for working capital, capital expenditures, acquisitions, product development and other general corporate requirements, which may adversely affect our ability to finance our operations, any acquisitions or investments or other capital needs or engage in other business activities that would be in our interests. Restrictive covenants may also limit our ability to plan for or react to market conditions or otherwise limit our activities or business plans and place us at a disadvantage compared to our competitors.

Risks of default. If we breach or are unable to comply with a covenant or other agreement contained in a debt instrument, the lender generally has the right to declare all borrowings outstanding under that debt instrument, together with accrued interest, to be immediately due and payable and may have the right to raise the interest rate. Upon an event of default under our credit facilities, the lender may require the immediate repayment of all outstanding loans and accrued interest. In addition, during the continuance of certain events of default under our credit facilities (subject to a cure period for some events of default), interest may accrue at a rate that is 200 basis points above the otherwise applicable rate. As a result, any breach or failure to comply with covenants contained in our debt instruments could seriously harm our business. Moreover, our credit facilities are secured by substantially all of our assets (including capital stock of our subsidiaries), except assets of our foreign subsidiaries and shares of some of our foreign subsidiaries, and if we are unable to pay indebtedness secured by collateral when due, whether at maturity or if declared due and payable by the lender following a default, the lender generally has the right to seize and sell the collateral securing that indebtedness. There can be no assurance that we will not breach the covenants or other terms of our credit facilities or any other debt instruments in the future and, if a breach occurs, there can be no assurance that we will be able to obtain necessary waivers or amendments from the lender or to refinance the related indebtedness on terms we find acceptable, or at all. As a result, any breach or default of this nature may seriously harm our business.

Restrictions under our credit facilities. We must comply with covenants under our current credit facilities, which require the maintenance of a maximum Consolidated Total Net Leverage Ratio of 3.0 to 1.0 and a Minimum Consolidated Interest Coverage Ratio of 3.0 to 1.0 (as defined in our credit facilities). Our Consolidated Total Net Leverage Ratio and Consolidated Interest Coverage Ratio were 1.1 to 1.0 and 11.5 to 1.0 as of December 31, 2021, respectively. While we were in compliance with all applicable financial covenants under our credit facilities as of December 31, 2021, there can be no assurance that we will not breach these financial covenants in our credit facilities in the future or other covenants in our future credit facilities.

Our credit facilities also include covenants that limit or restrict our ability to, among other things, incur liens on our properties, make acquisitions and other investments and sell assets, in each case, subject to specified exceptions. In addition to the covenants described in the preceding sentence, we are also prohibited from incurring indebtedness other than debt owed to the lenders under our credit facilities, debt associated with certain liens permitted by our credit facilities, certain subordinated debt and other specified exceptions. Our credit facilities also contain restrictions on our ability to pay dividends or make distributions in respect of our common stock or redemptions or repurchases of our common stock.

We conduct our operations and sell our gear internationally and the effect of business, legal and political risks associated with international operations may seriously harm our business.

Sales to customers outside the United States accounted for 61.7% and 62.1% our net revenue for 2021 and 2020, respectively. In addition, substantially all of the gear that we sell is manufactured at facilities in Asia. Our international sales and operations are subject to a wide range of risks, which may vary from country to country or region to region. These risks include the following:

26

Table of Contents

To the extent we successfully execute our strategy of expanding into new geographic areas, these and similar risks will increase. There can be no assurance that the risks relating to our international operations will not seriously harm our business.

System security and data protection breaches, as well as cyber-attacks, could disrupt our operations, reduce our expected revenue and increase our expenses, which may seriously harm our business.

Security breaches, computer malware and cyber-attacks have become more prevalent and sophisticated in recent years. These threats are constantly evolving, making it increasingly difficult to successfully defend against them or implement adequate preventative measures. These attacks have occurred on our systems in the past and are expected to occur in the future. Experienced computer programmers, hackers and employees may penetrate our security controls and misappropriate or compromise our confidential information or that of our employees or third parties. These attacks may create system disruptions or cause shutdowns. These hackers may also develop and deploy viruses, worms and other malicious software programs that attack or otherwise exploit security vulnerabilities in our systems. For example, we recently discovered the exploitation by hackers of our subsidiary SCUF’s servers, which may have enabled such hackers to collect information provided by our customers, including payment card information, which is handled by our third-party ecommerce service provider. Such hackers utilized the credentials we had provided to another third-party to inject a script, which was active for a limited amount of time, that collected this information provided by customers. Additionally, for portions of our information technology infrastructure, including business management and communication software products, we rely on products and services provided by third parties. These providers may also experience breaches and attacks to their products which may impact our systems. Data security breaches may also result from non-technical means, such as actions by an employee with access to our systems. To defend against security threats, both to our internal systems and those of our customers, we must continuously engineer more secure products and enhance security and reliability features, which may result in increased expenses.

Actual or perceived breaches of our security measures, those of third-parties or the accidental loss, inadvertent disclosure or unapproved dissemination of proprietary information or sensitive or confidential data about us, our partners, our customers or third parties have exposed, and may in the future could expose us and the parties affected to a risk of loss or misuse of this information, resulting in litigation and potential liability, paying damages, regulatory inquiries or actions, damage to our brand and reputation or other serious harm to our business. Our efforts to prevent and overcome these challenges could increase our expenses and may not be successful. We may experience interruptions, delays, cessation of service and loss of existing or potential customers. Such disruptions could adversely impact our ability to fulfill orders and interrupt other critical functions. Delayed sales, lower margins or lost customers as a result of these disruptions may seriously harm our business.

27

Table of Contents

We may not be able to maintain compliance with all current and potentially applicable U.S. federal and state or foreign laws and regulations relating to privacy and cybersecurity, and actions by regulatory authorities or changes in legislation and regulation in the jurisdictions in which we operate could have a material adverse effect on our business.

We are subject to a variety of laws, regulations, and industry standards that relate to the collection, processing, storing, disclosing, using, transfer and protecting of personal data and other data and the privacy of individuals. These laws and regulations constantly evolve and remain subject to significant change. In addition, the application and interpretation of these laws and regulations are often uncertain. Because we store, process and use data, some of which contain personal data, we are subject to complex and evolving federal, state and local laws and regulations regarding privacy, data protection and other matters. Many of these laws and regulations are subject to change and uncertain interpretation. The U.S. federal and state governments and agencies may in the future enact new legislation and promulgate new regulations governing collection, use, disclosure, storage, processing, transmission and destruction of personal data and other information. New privacy laws add additional complexity, requirements, restrictions and potential legal risk, require additional investment in resources to compliance programs, and could impact trading strategies and availability of previously useful data.

In addition, California enacted the California Consumer Privacy Act of 2018, or the CCPA, which came into force in 2020 (and is discussed in further detail below), which has encouraged “copycat” legislative proposals in other states across the country such as Nevada, Virginia, New Hampshire, Illinois and Nebraska. These legislative proposals may add additional complexity, variation in requirements, restrictions and potential legal risk, require additional investment in resources to compliance programs, and could impact strategies and availability of previously useful data.

We are also subject to payment card association operating rules, certification requirements and rules governing electronic funds transfers, including the Payment Card Industry Data Security Standard, or PCI DSS, a security standard applicable to companies that collect, store or transmit certain data regarding credit and debit cards, holders and transactions. Any data security incidents, such as those described above, and/or other issues involving payment card information, can constitute a failure to comply with PCI DSS, which may therefore violate payment card association operating rules and the terms of our contracts with payment networks, processors and merchant banks. Such failure to comply may result in the loss of our ability to accept credit and debit card payments, subject us to fines, penalties, and damages. In addition, there is no guarantee that PCI DSS compliance will prevent illegal or improper use of our payment systems or the theft, loss or misuse of data pertaining to credit and debit cards, credit and debit card holders and credit and debit card transactions.

Compliance with existing and emerging privacy and cybersecurity laws, regulations and industry standards could result in increased compliance costs and/or lead to changes in business practices and policies, and any failure to protect the confidentiality of client information could adversely affect our reputation, lead to private litigation against us, and require additional investment in resources, impact strategies and availability of previously useful data any of which could materially and adversely affect our business, operating results and financial condition.

The collection, storage, transmission, use and distribution of user data could give rise to liabilities and additional costs of operation as a result of laws, governmental regulation and risks of security breaches.

In connection with certain of our gear, we collect data related to our gamers and streamers. This data is increasingly subject to legislation and regulations in numerous jurisdictions around the world. Government actions are typically intended to protect the privacy and security of personal information and its collection, storage, transmission, use and distribution in or from the governing jurisdiction. In addition, because various jurisdictions have different laws and regulations concerning the use, storage and transmission of such information, we may face requirements that pose compliance challenges in existing markets as well as new international markets that we seek to enter.

Existing privacy-related laws and regulations in the United States and other countries are evolving and are subject to potentially differing interpretations, and various U.S. federal and state or other international legislative and regulatory bodies may expand or enact laws regarding privacy and data security-related matters. For example, the European Union General Data Protection Regulation, or GDPR, which came into effect on May 25, 2018, has led to more stringent operational requirements for processors and controllers of personal data, including, for example, requiring expanded disclosures about how personal information is to be used, limitations on retention of information, mandatory data breach notification requirements, and higher standards for data controllers to demonstrate that they have obtained valid consent or have another legal basis in place to justify their data processing activities. The GDPR provides that European Union member states may make their own additional laws and regulations in relation to certain data processing activities, which could limit our ability to use and share personal data or could require localized changes to our operating model. Under the GDPR, fines of up to €20 million or up to 4% of the total worldwide annual revenue of the preceding financial year, whichever is higher, may be assessed for non-compliance. These new laws also could cause our costs to increase and result in further administrative costs.

28

Table of Contents

Further, the United Kingdom’s decision to leave the European Union, often referred to as Brexit, means that from January 1, 2021, we are subject to the GDPR and also the UK GDPR, which, together with the amended UK Data Protection Act 2018, retains the GDPR in UK national law. The UK GDPR mirrors the fines under the GDPR, e.g. fines up to the greater of €20 million / £17.5 million or 4% of global turnover.

Although there are legal mechanisms to allow for the transfer of personal data from the United Kingdom, EEA and Switzerland to the United States, uncertainty about compliance with such data protection laws remains, and such mechanisms may not be available or applicable with respect to the personal data processing activities necessary to research, develop and market our products and services. For example, legal challenges in Europe to the mechanisms allowing companies to transfer personal data from the EEA or the United Kingdom to the United States could result in further limitations on the ability to transfer personal data across borders, particularly if governments are unable or unwilling to reach new or maintain existing agreements that support cross-border data transfers. Specifically, on July 16, 2020, the Court of Justice of the European Union invalidated Decision 2016/1250 on the adequacy of the protection provided by the EU-U.S. Privacy Shield Framework and guidance following the Decision requires risk assessments to be conducted and, in many cases additional safeguards to be implemented to transfer data under the standard contractual clauses. These recent developments will require us to review and amend the legal mechanisms by which we make and/ or receive personal data transfers to/ in the U.S. At present, there are few if any viable alternatives to the Standard Contractual Clauses. As supervisory authorities issue further guidance on personal data export mechanisms, including circumstances where the standard contractual clauses cannot be used, and/or start taking enforcement action, we could suffer additional costs, complaints and/or regulatory investigations or fines, and/or if we are otherwise unable to transfer personal data between and among countries and regions in which we operate, it could affect the manner in which we provide our services, the geographical location or segregation of our relevant systems and operations, and could adversely affect our financial results.

We are also subject to evolving European Union and United Kingdom privacy laws on cookies, tracking technologies and e-marketing. In the European Union and the United Kingdom under national laws derived from the ePrivacy Directive, informed consent is required for the placement of a cookie or similar technologies on a user’s device and for direct electronic marketing. The GDPR also imposes conditions on obtaining valid consent for cookies, such as a prohibition on pre-checked consents and a requirement to ensure separate consents are sought for each type of cookie or similar technology. The current national laws that implement the ePrivacy Directive are highly likely to be replaced across the European Union (but not directly in the United Kingdom) by an European Union regulation known as the ePrivacy Regulation which will significantly increase fines for non-compliance. While the text of the ePrivacy Regulation is still under development, recent European court decisions and regulators’ recent guidance are driving increased attention to cookies and tracking technologies.  If the trend of increasing enforcement by regulators of the strict approach in recent guidance and decisions continues, this could lead to substantial costs, require significant systems changes, limit the effectiveness of our marketing activities, divert the attention of our technology personnel, adversely affect our margins, increase costs and subject us to additional liabilities. Regulation of cookies and similar technologies, and any decline of cookies or similar online tracking technologies as a means to identify and potentially target users, may lead to broader restrictions and impairments on our marketing and personalization activities and may negatively impact our efforts to understand users.

In addition, the CCPA, which came into force in 2020, creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal data. For example, the CCPA gives California residents expanded rights to access and require deletion of their personal data, opt out of certain personal data sharing and receive detailed information about how their personal data is used. Failure to comply with the CCPA creates additional risks including enforcement by the California attorney general, private rights of actions for certain data breaches, and damage to reputation. The CCPA may increase our compliance costs and potential liability. Additionally, the Consumer Personal Information Law and Agency Initiative (California Proposition 24), the California Privacy Rights Act was approved by California voters on November 3, 2020. California Proposition 24 would impose additional data protection obligations on companies doing business in California. It will also create a new California data protection agency specifically tasked to enforce the law, which could likely result in increased regulatory scrutiny of California businesses in the areas of data protection and security. The new California Privacy Rights Act takes effect on January 1, 2023 and will apply to information collected on or after January 1, 2022.

Further, information security risks have generally increased in recent years because of the proliferation of new technologies and the increased sophistication and activities of perpetrators of cyber-attacks. Hackers and data thieves are increasingly sophisticated and operating large-scale and complex automated attacks. As cyber threats continue to evolve, we may be required to expend additional resources to further enhance our information security measures, develop additional protocols and/or to investigate and remediate any information security vulnerabilities. We cannot guarantee that our facilities and systems will be free of security breaches, cyber-attacks, acts of vandalism, computer viruses, malware, ransomware, denial-of-service attacks, misplaced or lost data, programming and/or human errors or other similar events. Any compromise or perceived compromise of the security of our systems could damage our reputation, result in disruption or interruption to our business operations, reduce demand for our products and subject us to

29

Table of Contents

significant liability and expense as well as regulatory action and lawsuits, which would harm our business, operating results and financial condition.

In addition, any failure or perceived failure by us to comply with privacy or security laws, policies, legal obligations or industry standards, or any security incident that results in the actual or alleged unauthorized release or transfer of personal data, may result in governmental enforcement actions and investigations, including fines and penalties, enforcement orders requiring us to cease processing or operating in a certain way, litigation and/or adverse publicity, including by consumer advocacy groups, and could cause our customers to lose trust in us, which could have material impacts on our revenue and operations and could seriously harm our business. We may also face civil claims including representative actions and other class action type litigation (where individuals have suffered harm), potentially amounting to significant compensation or damages liabilities, as well as associated costs, diversion of internal resources, and reputational harm.

We may be adversely affected by the financial condition of retailers and distributors to whom we sell our gear and may also be adversely affected by the financial condition of our competitors.

Retailers and distributors of consumer electronics products have, from time to time, experienced significant fluctuations in their businesses and some of them have become insolvent. A retailer or distributor experiencing such difficulties will generally not purchase and sell as much of our gear as it would under normal circumstances and may cancel orders. In addition, a retailer or distributor experiencing financial difficulties generally increases our exposure to uncollectible receivables. Moreover, if one of our distributor or retailer customers experiences financial distress or bankruptcy, they may be required to liquidate their inventory of our gear, or similar products that compete with our gear, at reduced prices, which can result in substantial over-supply and reduced demand for our gear over the short term. If any of these circumstances were to occur, it could seriously harm our business.

Likewise, our competitors may from time to time experience similar financial difficulties or may elect to terminate their sales of certain products. If one of our competitors experiences financial distress or bankruptcy and is forced to liquidate inventory or exits a product line and disposes of inventory at reduced prices, this may also result in over-supply of and reduced demand for our gear and could have a short-term adverse effect on our results of operations and financial condition.

Our online operations are subject to numerous risks that may seriously harm our business.

Our online operations, where we sell a number of products through our online stores, subject us to certain risks that could seriously harm our business, financial condition and results of operations. For example, the operation and expansion of our online stores may seriously harm our relationships with our retailers and distributors. Further, existing and future regulations and laws could impede the growth of our online operations. These regulations and laws may involve taxes, tariffs, privacy and data security, anti-spam, content protection, electronic contracts and communications, consumer protection and social media marketing. We cannot be sure that our practices have complied, comply or will comply fully with all such laws and regulations. Any failure, or perceived failure, by us to comply with any of these laws or regulations could result in damage to our reputation, a loss in business and proceedings or actions against us by governmental entities or others. Any such proceeding or action could hurt our reputation, force us to spend significant amounts in defense of these proceedings, distract our management, increase our costs of doing business and decrease the use of our sites by gamers, streamers and suppliers and may result in the imposition of monetary liability.

In addition, our online stores are partially handled by a third-party ecommerce service provider. We rely on this service provider to handle, among other things, payment and processing of online sales. If the service provider does not perform these functions satisfactorily, we may find another third-party service provider or undertake such operations ourselves, but we may not be able to successfully do either. In either case, our online sales and our customer service reputation could be adversely affected which, in turn, may seriously harm our business.

We may recognize restructuring and impairment charges in future periods, which will adversely affect our operating results and could seriously harm our business.

Depending on market and economic conditions in future periods, we may implement restructuring initiatives. As a result of these initiatives, we could incur restructuring charges, lose key personnel and experience disruptions in our operations and difficulties in delivering our gear.

We are required to test goodwill, intangible assets and other long-lived assets for recoverability and may be required to record charges if there are indicators of impairment, and we have in the past recognized impairment charges. As of December 31, 2021, we had approximately $317.1 million of goodwill, $225.7 million of intangible assets and $73.4 million of other long-lived assets. One of our strategies is to grow through acquisitions of other businesses or technologies and, if we are successful in doing so, these

30

Table of Contents

acquisitions may result in goodwill and other long-lived assets. The risk that we will be required to recognize impairment charges is also heightened by the fact that the life cycles of much of the gear we sell are relatively short, which increases the possibility that we may be required to recognize impairment charges for obsolete inventory. Impairment charges will adversely affect our operating results and could seriously harm our business.

Our future success depends to a large degree on our ability to defend the Corsair brand and product family brands such as SCUF, Vengeance, K70, Elgato and iCUE from infringement and, if we are unable to protect our brand and other intellectual property, our business may be seriously harmed.

We consider the Corsair brand to be one of our most valuable assets. We also consider the Elgato, Origin, and SCUF brands, proprietary technology brands such as iCUE and Slipstream, and major product family brands such as Corsair ONE, Dark Core, Dominator, Glaive, Harpoon, Ironclaw, K70, K100, Nightsword, Scimitar, Vengeance, Virtuoso and Void to be important to our business. Our future success depends to a large degree upon our ability to defend the Corsair brand, proprietary technology brands and product family brands from infringement and to protect our other intellectual property. We rely on a combination of copyright, trademark, patent and other intellectual property laws and confidentiality procedures and contractual provisions such as nondisclosure terms to protect our intellectual property. Although we hold a trademark registration on the Corsair name in the United States and a number of other countries, the Corsair name does not have trademark protection in other parts of the world, including some major markets, and we may be unable to register the Corsair name as a trademark in some countries. Likewise, we hold a trademark registration on certain brands such as K70 only in the United States, Australia and New Zealand and therefore such brands do not have trademark protection in other parts of the world. If third parties misappropriate or infringe on our brands or we are unable to protect our brands, or if third parties use the Corsair, Corsair ONE, Dark Core, Dominator, Elgato, Glaive, Harpoon, iCUE, Ironclaw, K70, K100, Nightsword, Origin, SCUF, Slipstream, Scimitar, Vengeance, Virtuoso and Void brand names, or other brand names we maintain, to sell their products in countries where we do not have trademark protection, it may seriously harm our business.

We hold a limited number of patents and pending patent applications. It is possible that any patent owned by us will be invalidated, deemed unenforceable, circumvented or challenged and that our pending or any future patent applications will not be granted. In addition, other intellectual property laws or our confidentiality procedures and contractual provisions may not adequately protect our intellectual property and others may independently develop similar technology, duplicate our gear, or design around any intellectual property rights we may have. Any of these events may seriously harm our business.

Certain of the licenses pursuant to which we are permitted to use the intellectual property of third parties can be terminated at any time by us or the other party. If we are unable to negotiate and maintain licenses on acceptable terms, we will be required to develop alternative technology internally or license it from other third parties, which may be difficult and costly or impossible.

The expansion of our business will require us to protect our trademarks, domain names, copyrights, patents and other intellectual property rights in an increasing number of jurisdictions, a process that is expensive and sometimes requires litigation. If we are unable to protect and enforce our trademarks, domain names, copyrights, patents and other intellectual property rights, or prevent third parties from infringing upon them, our business may be seriously harmed.

We have taken steps in the past to enforce our intellectual property rights and expect to continue to do so in the future. However, it may not be practical or cost-effective for us to enforce our rights with respect to certain items of intellectual property rights fully, or at all, particularly in developing countries where the enforcement of intellectual property rights may be more difficult than in the United States. It is also possible that, given the costs of obtaining patent protection, we may choose not to seek patent protection for certain items of intellectual property that may later turn out to be important.

Some of our products contain open source software, which may pose particular risks to our proprietary software and products.

Our products rely on software licensed by third parties under open source licenses, including as incorporated into software we receive from third-party commercial software vendors, and will continue to rely on such open source software in the future. Use of open source software may entail greater risks than use of third-party commercial software, as open source licensors generally do not provide support, updates, warranties or other contractual protections regarding infringement claims or the quality of the code, and the wide availability of source code to components used in our products could expose us to security vulnerabilities. Further, the terms of many open source licenses have not been interpreted by U.S. courts, and there is a risk that such licenses could be construed in a manner that imposes unanticipated conditions or restrictions on our ability to market or commercialize our products. As a result, we may face claims from third parties claiming ownership of what we believe to be open source software. In addition, by the terms of some open source licenses, under certain conditions, we could be required to release our proprietary source code, and to make our proprietary software available under open source licenses, including authorizing further modification and redistribution. These claims

31

Table of Contents

or requirements could result in litigation and could require us to purchase a costly license or cease offering the implicated products unless and until we can re-engineer them to avoid infringement or release of our proprietary source code. This re-engineering process could require significant additional research and development resources. In addition, we have intentionally made certain software we have developed available on an open source basis, both by contributing modifications back to existing open source projects, and by making certain internally developed tools available pursuant to open source licenses, and we plan to continue to do so in the future. While we engage in a review process for any such contributions, which is designed to protect any code that may be competitively sensitive, it is still possible that our competitors or others could use this code for competitive purposes, or for commercial or other purposes beyond what we intended. Any of these risks could be difficult to eliminate or manage, and, if not addressed, could seriously harm our business.

We are, have in the past been, and may in the future be, subject to intellectual property infringement claims, which are costly to defend, could require us to pay damages or royalties and could limit our ability to use certain technologies in the future.

Companies in the technology industry are frequently subject to litigation or disputes based on allegations of infringement or other violations of intellectual property rights. We have faced claims that we have infringed, or that our use of components or products supplied to us by third parties have infringed, patents or other intellectual property rights of others in the past and may in the future face similar claims. While we are currently involved in an intellectual property infringement claim, we do not believe such claim will have a material adverse effect on our business.

Any intellectual property claims, with or without merit, can be time-consuming, expensive to litigate or settle and can divert management resources and attention. For example, in the past we have settled claims relating to infringement allegations and agreed to make royalty or license payments in connection with such settlements. An adverse determination could require that we pay damages, which could be substantial, or stop using technologies found to be in violation of a third-party’s rights and could prevent us from selling some of our gear. In order to avoid these restrictions, we may have to seek a license for the technology. Any such license may not be available on reasonable terms or at all, could require us to pay significant royalties and may significantly increase our operating expenses or otherwise seriously harm our business or operating results. As a result, we may be required to develop alternative non-infringing technologies, which could require significant effort and expense and might not be successful or, if alternative non-infringing technologies already exist, we may be required to license those technologies from third parties, which may be expensive or impossible. If we cannot license or develop technologies for any infringing aspects of our business, we may be forced to halt sales of our gear incorporating the infringing technologies and may be unable to compete effectively. Any of these results may seriously harm our business.

We and our contract manufacturers may be adversely affected by seismic activity or other natural disasters, and our business continuity and disaster recovery plans may not adequately protect us from a serious disaster.

Our corporate headquarters are located in the San Francisco Bay Area and the testing and packaging of most of our DRAM modules take place in our facility in Taiwan. Both locations are known to experience earthquakes from time to time, some of which have been severe. In addition, typhoons and other severe weather systems frequently affect Taiwan. Most of the third-party facilities where our gear and some of the components used in our gear is manufactured are located in China, Taiwan, Southeast Asia and other areas that are known for seismic activity and other natural disasters. Earthquakes in any of the foregoing areas may also result in tsunamis. We do not carry earthquake insurance. As a result, earthquakes or other natural disasters could severely disrupt our operations, either directly or as a result of their effect on third-party manufacturers and suppliers upon whom we rely and their respective supply chains and may negatively impact the ordering patterns of our customers and may seriously harm our business.

We are subject to various environmental laws, conflict mineral-related provisions of the Dodd-Frank Act and other regulations that could impose substantial costs upon us and may seriously harm our business.

Our operations, properties and the gear we sell are subject to a variety of U.S. and foreign environmental laws and regulations governing, among other things, air emissions, wastewater discharges, management and disposal of hazardous and non-hazardous materials and waste, and remediation of releases of hazardous materials. Our failure to comply with present and future requirements under these laws and regulations, or environmental contamination or releases of hazardous materials on our leased premises, as well as through disposal of our gear, could cause us to incur substantial costs, including clean-up costs, personal injury and property damage claims, fines and penalties, costs to redesign our gear or upgrade our facilities and legal costs, or require us to curtail our operations. Environmental contamination or releases of hazardous materials may also subject us to claims of property damage or personal injury, which could result in litigation and require us to make substantial payments to satisfy adverse judgments or pay settlements. Liability under environmental laws can be joint and several and without regard to comparative fault. We also expect that our operations will be affected by new environmental laws and regulations on an ongoing basis, which will likely result in additional costs. Environmental laws and regulations could also require that we redesign our gear or change how our gear is made, any

32

Table of Contents

of which could seriously harm our business. The costs of complying with environmental laws and regulations or the effect of any claims or liability concerning or resulting from noncompliance or environmental contamination could also seriously harm our business.

Under the Dodd-Frank Act, the SEC adopted disclosure and reporting requirements for companies that use “conflict” minerals originating from the Democratic Republic of Congo or adjoining countries. We continue to incur costs associated with complying with these requirements, such as costs related to developing internal controls for the due diligence process, determining the source of any conflict minerals used in our gear, auditing the process and reporting to our customers and the SEC. In addition to the SEC regulation, the European Union, China and other jurisdictions are developing new policies focused on conflict minerals that may impact and increase the cost of our compliance program. Also, since our supply chain is complex, we may face reputational challenges if we are unable to sufficiently verify the origins of the subject minerals. Moreover, we are likely to encounter challenges to satisfy those customers who require that all of the components of our gear are certified as “conflict free.” If we cannot satisfy these customers, they may choose a competitor’s products.

The U.S. federal government has issued new policies for federal procurement focused on eradicating the practice of forced labor and human trafficking. In addition, the United Kingdom and the State of California have issued laws that require us to disclose our policy and practices for identifying and eliminating forced labor and human trafficking in our supply chain. While we have a policy and management systems to identify and avoid these practices in our supply chain, we cannot guarantee that our suppliers will always be in conformance to these laws and expectations. We may face enforcement liability and reputational challenges if we are unable to sufficiently meet these expectations.

Risks Related to Our Common Stock

We are controlled by EagleTree, whose interests in our business may be different than yours.

As of December 31, 2021, EagleTree beneficially owned approximately 57.3% of our common stock and is able to control our affairs in all cases. Further, pursuant to the terms of an Investor Rights Agreement between us and EagleTree, EagleTree has the right, among other things, to designate the chairman of our board of directors, as well as the right to nominate up to five out of eight directors to our board of directors as long as affiliates of EagleTree beneficially own at least 50% of our common stock, four directors as long as affiliates of EagleTree beneficially own at least 40% and less than 50% of our common stock, three directors as long as affiliates of EagleTree beneficially own at least 30% and less than 40% of our common stock, two directors as long as affiliates of EagleTree beneficially own at least 20% and less than 30% of our common stock and one director as long as affiliates of EagleTree beneficially own at least 10% and less than 20% of our common stock.

As a result of the foregoing, EagleTree or its respective designees to our board of directors will have the ability to control the appointment of our management, the entering into of mergers, sales of substantially all or all of our assets and other extraordinary transactions and influence amendments to our amended and restated certificate of incorporation and bylaws. So long as EagleTree continues to beneficially own a majority of our common stock, they will have the ability to control the vote in any election of directors and will have the ability to prevent any transaction that requires stockholder approval regardless of whether other stockholders believe the transaction is in our best interests. In any of these matters, the interests of EagleTree may differ from or conflict with your interests. Moreover, this concentration of stock ownership may also adversely affect the trading price for our common stock to the extent investors perceive disadvantages in owning stock of a company with a controlling stockholder. In addition, EagleTree is in the business of making investments in companies and may, from time to time, acquire interests in businesses that directly or indirectly compete with our business, as well as businesses that are our significant existing or potential suppliers or customers. EagleTree may acquire or seek to acquire assets that we seek to acquire and, as a result, those acquisition opportunities may not be available to us or may be more expensive for us to pursue.

We are a “controlled company” within the meaning of the Nasdaq rules and, as a result, will qualify for, and intend to rely on, exemptions from certain corporate governance requirements. You will not have the same protections afforded to stockholders of companies that are subject to such requirements.

EagleTree controls a majority of the voting power of our outstanding common stock. As a result, we are a “controlled company” within the meaning of the corporate governance standards of the Nasdaq Global Select Market, or Nasdaq. Under these rules, a company of which more than 50% of the voting power is held by an individual, group or another company is a “controlled company” and may elect not to comply with certain corporate governance requirements, including requirements that:

33

Table of Contents

We currently utilize certain of these exemptions. As a result, pursuant to an agreement with EagleTree, nominations for certain of our directors will be made by EagleTree based on its ownership of our outstanding voting stock. Accordingly, for so long as we are a “controlled company,” you will not have the same protections afforded to stockholders of companies that are subject to all of the corporate governance requirements of Nasdaq. In the event that we cease to be a “controlled company” and our shares continue to be listed on Nasdaq, we will be required to comply with these provisions within the applicable transition periods.

The market price of our common stock may be volatile and may decline.

The stock market in general, and the market for stocks of technology companies in particular, has been highly volatile. As a result, the market price of our common stock is likely to be volatile, and investors in our common stock may experience a decrease, which could be substantial, in the value of their common stock or the loss of their entire investment for a number of reasons, including reasons unrelated to our operating performance or prospects. The market price of our common stock could be subject to wide fluctuations in response to a broad and diverse range of factors, including those described elsewhere in this “Risk Factors” section and the following:

In the past, securities class action litigation has often been initiated against companies following periods of volatility in their stock price. This type of litigation could result in substantial costs and divert our management’s attention and resources and could also require us to make substantial payments to satisfy judgments or to settle litigation.

An active, liquid and orderly market for our common stock may not be maintained.

Our stock only recently began trading on Nasdaq, but we can provide no assurance that we will be able to maintain an active trading market on Nasdaq or any other exchange in the future. If an active market for our common stock is not maintained, it may be difficult for our stockholders to sell shares without depressing the market price for the shares or at all. An inactive market may also impair our ability to raise capital by selling shares and may impair our ability to acquire other businesses, applications, or technologies using our shares as consideration.

34

Table of Contents

Future sales of our common stock in the public market could cause our stock price to fall.

If our existing stockholders sell, or indicate an intention to sell, substantial amounts of our common stock in the public, the trading price of our common stock could decline. Based upon the number of shares outstanding as of December 31, 2021, we had outstanding a total of 94.5 million shares of common stock. Of these shares, all of the shares of our common stock sold in the initial public offering and in the secondary offering in January 2021, are freely tradable, without restriction, in the public market.

As of December 31, 2021, the holders of approximately 54.2 million shares of our common stock, or approximately 57.3% of our total outstanding common stock based upon the number of shares outstanding as of December 31, 2021, will be entitled to rights with respect to the registration of their shares under the Securities Act. Registration of these shares under the Securities Act would result in the shares becoming freely tradable without restriction under the Securities Act, except for shares purchased by affiliates. Any sales of securities by these stockholders could have a material adverse effect on the trading price of our common stock.

If we sell shares of our common stock in future financings, stockholders may experience immediate dilution and, as a result, our stock price may decline.

We may from time to time issue additional shares of common stock at a discount from the current trading price of our common stock. As a result, our stockholders would experience immediate dilution upon the purchase of any shares of our common stock sold at such discount. In addition, as opportunities present themselves, we may enter into financing or similar arrangements in the future, including the issuance of debt securities, preferred stock or common stock. If we issue common stock or securities convertible into common stock, our common stockholders would experience additional dilution and, as a result, our stock price may decline.

Our amended and restated certificate of incorporation and amended and restated bylaws contain antitakeover provisions that could delay, deter or prevent takeover attempts that stockholders may consider favorable or attempts to replace or remove our management that would be beneficial to our stockholders.

Certain provisions of our amended and restated certificate of incorporation and amended and restated bylaws could delay, deter or prevent a change in control or other takeover of our company that our stockholders might consider to be in their best interests, including transactions that might result in a premium being paid over the market price of our common stock and also may limit the price that investors are willing to pay in the future for our common stock. These provisions may also have the effect of preventing changes in our management. For example, our amended and restated certificate of incorporation and amended and restated bylaws include anti-takeover provisions that:

35

Table of Contents

We have opted out of Section 203 of the Delaware General Corporation Law, or DGCL, which prevents stockholders holding more than 15% of our outstanding common stock from engaging in certain business combinations involving us unless certain conditions are satisfied. However, our amended and restated certificate of incorporation will include similar provisions that we may not engage in certain business combinations with interested stockholders for a period of three years following the time that the stockholder became an interested stockholder, subject to certain conditions. Pursuant to the terms of our amended and restated certificate of incorporation, EagleTree will not be considered an interested stockholder for purposes of this provision.

Claims for indemnification by our directors and officers may reduce our available funds to satisfy successful third-party claims against us and may reduce the amount of money available to us.

Our amended and restated certificate of incorporation and amended and restated bylaws provide that we will indemnify our directors and officers, in each case to the fullest extent permitted by Delaware law.

In addition, as permitted by Section 145 of the DGCL, our amended and restated bylaws and our indemnification agreements that we have entered into with our directors and officers provide that:

We do not currently intend to pay dividends on our common stock, and, consequently, your ability to achieve a return on your investment will depend on appreciation in the price of our common stock.

We do not currently intend to pay any cash dividends on our common stock for the foreseeable future. We currently intend to invest our future earnings, if any, to fund our growth. Therefore, you are not likely to receive any dividends on your common stock for the foreseeable future. Since we do not intend to pay dividends, your ability to receive a return on your investment will depend on any future appreciation in the market value of our common stock. There is no guarantee that our common stock will appreciate or even maintain the price at which our holders have purchased it.

36

Table of Contents

If securities or industry analysts do not publish or cease publishing research or reports about our business, if they adversely change their recommendations regarding our shares or if our operating results do not meet their expectations, the market price of our common stock could decline.

The market price of our common stock is influenced by the research and reports that industry or securities analysts publish about us or our business. If one or more of these analysts cease coverage of our company or fail to publish reports on us regularly, we could lose visibility in the financial markets, which in turn could cause the market price or trading volume of our common stock to decline. Moreover, if one or more of the analysts who cover our company downgrade our common stock or if our operating results or prospects do not meet their expectations, the market price of our common stock could decline.

Our amended and restated certificate of incorporation provides that the Court of Chancery of the State of Delaware will be the sole and exclusive forum for substantially all disputes between us and our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers or employees.

Our amended and restated certificate of incorporation provides that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware is the sole and exclusive forum for: (a) any derivative action or proceeding brought on our behalf; (b) any action asserting a claim of breach of a fiduciary duty owed by any of our directors, officers, employees or agents to us or our stockholders; (c) any action asserting a claim arising pursuant to any provision of the DGCL or of our amended and restated certificate of incorporation or our amended and restated bylaws; or (d) any action asserting a claim related to or involving our company that is governed by the internal affairs doctrine. Our amended and restated certificate of incorporation also provides that the federal district courts of the Unites States will be the exclusive forum for the resolution of any complaint asserting a cause of action against us or any of our directors, officers, employees or agents and arising under the Securities Act. The choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers or other employees, which may discourage such lawsuits against us and our directors, officers and other employees. Alternatively, if a court were to find the choice of forum provision contained in our amended and restated certificate of incorporation to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could seriously harm our business. The choice of forum provision requiring that the Court of Chancery of the State of Delaware be the exclusive forum for certain actions would not apply to suits brought to enforce any liability or duty created by the Exchange Act.

Our amended and restated certificate of incorporation contains a provision renouncing our interest and expectancy in certain corporate opportunities.

Under our amended and restated certificate of incorporation, none of EagleTree or any of its respective portfolio companies, funds or other affiliates, or any of their officers, directors, agents, stockholders, members or partners will have any duty to refrain from engaging, directly or indirectly, in the same business activities, similar business activities or lines of business in which we operate. In addition, our amended and restated certificate of incorporation provides that, to the fullest extent permitted by law, no officer or director of ours who is also an officer, director, employee, managing director or other affiliate of EagleTree will be liable to us or our stockholders for breach of any fiduciary duty by reason of the fact that any such individual was presented with a corporate opportunity, other than specifically in their capacity as one of our officers or directors, and ultimately directs such corporate opportunity to EagleTree instead of us, or does not communicate information regarding a corporate opportunity to us that the officer, director, employee, managing director or other affiliate has directed to EagleTree. For instance, a director of our company who also serves as a director, officer or employee of EagleTree, or any of its respective portfolio companies, funds or other affiliates may pursue certain acquisitions or other opportunities that may be complementary to our business and, as a result, such acquisition or other opportunities may not be available to us. As of December 31, 2021, this provision of our amended and restated certificate of incorporation relates only to the EagleTree director designees. These potential conflicts of interest could seriously harm our business if attractive corporate opportunities are allocated by EagleTree to itself or its respective portfolio companies, funds or other affiliates instead of to us.

General Risk Factors

We may be subject to future tax audits in various jurisdictions, which may seriously harm our business.

We operate in multiple jurisdictions, are taxed pursuant to the tax laws of each of these jurisdictions and may be subject to future tax audits in each of these jurisdictions. Because we have substantial operations in a number of locations worldwide, tax authorities in various jurisdictions may raise questions concerning matters such as transfer pricing, whether revenues or expenses should be attributed to particular countries, the presence or absence of permanent establishments in particular countries and similar matters. In addition, we have engaged in a number of material restructuring transactions in various jurisdictions, and the tax positions

37

Table of Contents

we have adopted in connection with these restructuring transactions may be subject to challenge. Accordingly, a material assessment by a tax authority in any jurisdiction could require that we make significant cash payments without reimbursement. If this were to occur, our business may be seriously harmed.

Failure to comply with other laws and governmental regulations may seriously harm our business.

Our business is subject to regulation by various federal and state governmental agencies. Such regulation includes the consumer protection laws of the Federal Trade Commission, the import/export regulatory activities of the Department of Commerce, the product safety regulatory activities of the Consumer Products Safety Commission, the regulatory activities of the Occupational Safety and Health Administration, the environmental regulatory activities of the Environmental Protection Agency, the labor regulatory activities of the Equal Employment Opportunity Commission and tax and other regulations by a variety of regulatory authorities in each of the areas in which we conduct business. We are also subject to regulation in other countries where we conduct business. In certain jurisdictions, such regulatory requirements may be more stringent than in the United States. We are also subject to a variety of federal, state and foreign employment and labor laws and regulations, including the Americans with Disabilities Act, the Federal Fair Labor Standards Act and other laws and regulations related to working conditions, wage-hour pay, overtime pay, employee benefits, anti-discrimination and termination of employment.

Noncompliance with applicable regulations or requirements could subject us to investigations, sanctions, mandatory product recalls, enforcement actions, fines, damages, civil and criminal penalties or injunctions. In certain of these instances the former employee has brought legal proceedings against us, and we expect that we will encounter similar actions against us in the future. An adverse outcome in any such litigation could require us to pay damages, which may include punitive damages, attorneys’ fees and costs.

As a result, noncompliance or any related enforcement or civil actions could result in governmental sanctions and possible civil or criminal litigation, which could seriously harm our business and result in a significant diversion of management’s attention and resources.

Failure to comply with the U.S. Foreign Corrupt Practices Act, other applicable anti-corruption and anti-bribery laws, and applicable trade control laws could subject us to penalties and other adverse consequences that may seriously harm our business.

Our gear is manufactured and/or assembled in China, Taiwan, where we maintain a manufacturing facility, countries in Southeast Asia and the United Kingdom and we sell our gear in many countries outside of the United States. Our operations are subject to the U.S. Foreign Corrupt Practices Act, or the FCPA, as well as the anti-corruption and anti-bribery laws in the countries where we do business. The FCPA prohibits covered parties from offering, promising, authorizing or giving anything of value, directly or indirectly, to a “foreign government official” with the intent of improperly influencing the official’s act or decision, inducing the official to act or refrain from acting in violation of lawful duty, or obtaining or retaining an improper business advantage. The FCPA also requires publicly traded companies to maintain records that accurately and fairly represent their transactions and to have an adequate system of internal accounting controls. In addition, other applicable anti-corruption laws prohibit bribery of domestic government officials, and some laws that may apply to our operations prohibit commercial bribery, including giving or receiving improper payments to or from non-government parties, as well as so-called “facilitation” payments. In addition, we are subject to U.S. and other applicable trade control regulations that restrict with whom we may transact business, including the trade sanctions enforced by the U.S. Treasury, Office of Foreign Assets Control, or OFAC.

While we have implemented policies, internal controls and other measures reasonably designed to promote compliance with applicable anti-corruption and anti-bribery laws and regulations, and certain safeguards designed to ensure compliance with U.S. trade control laws, our employees or agents may engage in improper conduct for which we might be held responsible. Any violations of these anti-corruption or trade controls laws, or even allegations of such violations, can lead to an investigation and/or enforcement action, which could disrupt our operations, involve significant management distraction, and lead to significant costs and expenses, including legal fees. If we, or our employees or agents acting on our behalf, are found to have engaged in practices that violate these laws and regulations, we could suffer severe fines and penalties, profit disgorgement, injunctions on future conduct, securities litigation, bans on transacting government business, delisting from securities exchanges and other consequences that may seriously harm our business, financial condition and results of operations. In addition, our brand and reputation, our sales activities or our stock price could be adversely affected if we become the subject of any negative publicity related to actual or potential violations of anti-corruption, anti-bribery or trade control laws and regulations.

38

Table of Contents

As a public reporting company, we are subject to rules and regulations established from time to time by the SEC and Nasdaq regarding our internal controls over financial reporting. We may not complete needed improvements to our internal controls over financial reporting in a timely manner, or these internal controls may not be determined to be effective, which may adversely affect investor confidence in our company and, as a result, the value of our common stock and your investment.

We are subject to the rules and regulations established from time to time by the Securities and Exchange Commission, or SEC, and Nasdaq. These rules and regulations require, among other things, that we establish and periodically evaluate procedures with respect to our internal controls over financial reporting. As part of these evaluations, material weaknesses in our internal controls over financial reporting may be identified. A material weakness is a deficiency, or a combination of deficiencies, in internal controls over financial reporting such that there is a reasonable possibility that a material misstatement of a company’s annual or interim consolidated financial statements will not be prevented or detected on a timely basis.  While we were able to remediate previously identified material weaknesses in our internal controls over financial reporting, there can be no guarantee we will not identify similar or other material weaknesses in the future and if such material weaknesses are identified, there can be no guarantee we would be able to remediate such material weaknesses. Any material weaknesses in our internal controls may adversely affect our ability to record, process, summarize and accurately report timely financial information and, as a result, our consolidated financial statements may contain material misstatements or omissions.

Reporting obligations as a public company place a considerable strain on our financial and management systems, processes and controls, as well as on our personnel. In addition, as a public company we are required to document and test our internal controls over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act so that our management can certify as to the effectiveness of our internal controls over financial reporting. Likewise, our independent registered public accounting firm is required to provide an attestation report on the effectiveness of our internal controls over financial reporting in our Annual Reports on Form 10-K. If our management is unable to certify the effectiveness of our internal controls or if our independent registered public accounting firm cannot deliver a report attesting to the effectiveness of our internal controls over financial reporting, or if we identify or fail to remediate material weaknesses in our internal controls, we could be subject to regulatory scrutiny and a loss of public confidence, which could seriously harm our reputation and the market price of our common stock. In addition, if we do not maintain adequate financial and management personnel, processes and controls, we may not be able to manage our business effectively or accurately report our financial performance on a timely basis, which could cause a decline in our common stock price and may seriously harm our business.

We will incur significant expenses as a result of being a public company, which will negatively impact our financial performance.

As a public company, we incur significant legal, accounting and other expenses that we did not incur as a private company. We are subject to the reporting requirements of the U.S. Exchange Act of 1934, as amended, or the Exchange Act, which will require, among other things, that we file with the SEC annual, quarterly and current reports with respect to our business and financial condition. In addition, the Sarbanes-Oxley Act, as well as rules subsequently adopted by the SEC and the stock exchange on which our securities are listed to implement provisions of the Sarbanes-Oxley Act, impose significant requirements on public companies, including requiring establishment and maintenance of effective disclosure and financial controls and changes in corporate governance practices. Further, pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, the SEC has adopted additional rules and regulations in these areas, such as mandatory “say-on-pay” voting requirements. Stockholder activism, the current political environment and the current high level of government intervention and regulatory reform may lead to substantial new regulations and disclosure obligations, which may lead to additional compliance costs and impact the manner in which we operate our business in ways we cannot currently anticipate.

The rules and regulations applicable to public companies have substantially increased our legal and financial compliance costs. If these requirements divert the attention of our management and personnel from other business concerns, they could seriously harm our business, financial condition and results of operations. The increased costs will decrease our net income or increase our net loss, and may require us to reduce costs in other areas of our business or increase the prices of our gear. For example, we expect these rules and regulations to make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to incur substantial costs to maintain the same or similar coverage. We cannot predict or estimate the amount or timing of additional costs we may incur to respond to these requirements. The impact of these requirements could also make it more difficult for us to attract and retain qualified persons to serve on our board of directors, our board committees or as executive officers. Further, if we are unable to satisfy our obligations as a public company, we could be subject to delisting of our common stock, fines, sanctions and other regulatory action and potentially civil litigation.

39

Table of Contents

Our business could be negatively impacted by corporate citizenship and ESG matters and/or our reporting of such matters.

Institutional, individual, and other investors, proxy advisory services, regulatory authorities, consumers and other stakeholders are increasingly focused on environmental, social and governance, or ESG, practices of companies. As we look to respond to evolving standards for identifying, measuring, and reporting ESG metrics, our efforts may result in a significant increase in costs and may nevertheless not meet investor or other stakeholder expectations and evolving standards or regulatory requirements, which may negatively impact our financial results, our reputation, our ability to attract or retain employees, our attractiveness as a service provider, investment, or business partner, or expose us to government enforcement actions, private litigation, and actions by stockholders or stakeholders.

40

Table of Contents

Item 1B. Unresolved Staff Comments.

None.

Item 2. Properties.

Our current principal executive office is located in Fremont, California and consists of approximately 96,000 square feet of space under a lease that expires in May 2022 and thereafter, we plan to move our principal executive office and headquarters to Milpitas, California. The lease for the new Milpitas headquarters occupies approximately 118,000 square feet and expires in August 2032. We also lease manufacturing and warehousing facilities in Georgia, Florida, Netherlands and Taiwan, as well as properties in various parts of the United States, Europe and Asia for our product development, sales and service support and administrative functions. Our total property leases as of December 31, 2021, which expire at various dates through August 2032, are for an aggregate of approximately 634,000 square feet (excluding the Fremont headquarters lease). In addition, we have approximately 306,000 square feet of space dedicated to us in our contracts with various third-party distribution centers in California and China for additional warehouses to store our inventory.

Both our gamer and creator peripherals segment and gaming components and systems segment utilize substantially each of our leased facilities.

We believe that the facilities that we currently occupy are adequate for our current needs and that suitable additional space will be available, as needed, to accommodate the presently foreseeable expansion of our operations.

Item 3. Legal Proceedings.

We may from time to time be involved in various legal proceedings of a character normally incident to the ordinary course of our business. Although the outcome of any pending matters, and the amount, if any, of our ultimate liability and any other forms of remedies with respect to these matters, cannot be determined or predicted with certainty, we do not believe that the ultimate outcome of these matters will have a material adverse effect on our business, results of operations or financial condition.

Item 4. Mine Safety Disclosures.

Not applicable.

41

Table of Contents

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information of our Common Stock

Our common stock is traded on the Nasdaq Global Select Market under the symbol “CRSR”.

Holders

According to the records of our transfer agent, there were 17 holders of record of our common stock on February 14, 2022. Because many of such shares are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of stockholders represented by these record holders.

Dividend Policy

We intend to retain all available funds and any future earnings, if any, to fund the development and expansion of our business, and we do not anticipate paying any cash dividends in the foreseeable future. Any future determination related to dividend policy will be made at the discretion of our board of directors and will depend on a number of factors, including future earnings, capital requirements, financial conditions, future prospects, contractual restrictions and covenants and other factors that our board of directors may deem relevant. Further, our credit facilities also contain restrictions on our ability to pay dividends or make distributions in respect of our common stock or redemptions or repurchases of our common stock and future credit facilities or other borrowing arrangements may contain similar provisions.

Stock Performance Graph

This performance graph shall not be deemed “soliciting material” or to be “filed” with the SEC, for purposes of Section 18 of the Exchange Act, or otherwise subject to the liabilities under that Section, and shall not be deemed to be incorporated by reference into any of our filings under the Securities Act.

The graph below compares (i) the cumulative total stockholder return on our common stock from September 23, 2020 (the date our common stock commenced trading on Nasdaq Global Select Market) through December 31, 2021 with (ii) the cumulative total

42

Table of Contents

return of the Nasdaq Composite Index and the S&P Information Technology Index over the same period, assuming the investment of $100 in our common stock and in both of the indices on September 23, 2020 and the reinvestments of dividends, if any.

Unregistered Sales of Equity Securities

None.

Issuer Purchases of Equity Securities

None.

Item 6. [Reserved]

43

Table of Contents

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

You should read the following discussion of our financial condition and results of operations in conjunction with the consolidated financial statements and the related notes included elsewhere in this Annual Report on Form 10-K. The following discussion contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from such forward-looking statements. Factors that could cause or contribute to these differences include those discussed below and elsewhere in this Annual Report on Form 10-K, particularly in the section Item 1A, “Risk Factors” and below in Item 7A, “Quantitative and Qualitative Disclosures about Market Risk”.  

Overview

We are a leading global provider and innovator of high-performance gear for gamers, streamers and content creators, many of which build their own PCs using our components. Our industry-leading gaming gear helps digital athletes, from casual gamers to committed professionals, perform at their peak across PC or console platforms, and streaming gear that enables streamers and content creators to produce studio-quality content to share with friends or to broadcast to millions of fans. Our PC components products offer our customers multiple options to build their customized gaming and workstation desktop PCs. Our solution is the most complete suite of gear that addresses the most critical components for both game performance and streaming. Our product offering is enhanced by our two proprietary software platforms: iCUE for gamers and the Elgato streaming suite for content creators, including our Stream Deck control software, which provide unified, intuitive performance, and aesthetic control and customization across their respective product families. In 2020, we also added a digital services layer to our offerings to enhance the customer experience by integrating esports, coaching, stream deck marketplace, customer care and extended warranty into our offerings.

We group our products into two categories (segments):

Further information on our industry, our market opportunity and competitive strengths is presented in Part I, Item 1, “Business” of this Annual Report on Form 10-K.

Our net revenue was $1,904.1 million, $1,702.4 million, and $1,097.2 million for the years ended December 31, 2021, 2020, and 2019, respectively. We had net income (loss) of $101.0 million, $103.2 million and $(8.4) million, respectively. Net cash provided by operating activities was $20.2 million, $169.0 million, and $37.1 million for the years ended December 31, 2021, 2020, and 2019, respectively. We continue to experience a shift in net revenue towards a more significant mix of our higher margin gamer and creator peripherals segment, which represented 34.0%, 31.7% and 26.8% of total net revenue for the years ended December 31, 2021, 2020 and 2019, respectively. As our product portfolio continues to expand, our go-to-market model has also been evolving with an increased mix of direct-to-consumer sales representing 10.7%, 8.6% and 2.7% of total net revenue for the years ended December 31, 2021, 2020 and 2019, respectively.

Our net revenue increased 55.2% in 2020, as compared to 2019, primarily due to a larger number of consumers gaming and working from home as a result of the COVID-19 pandemic. Going into 2021, while the lockdowns and shelter-in-place restrictions were gradually lifted, our net revenue continued to grow by 11.8%, despite the negative impact from the global supply chain and logistics challenges as well as the shortages of reasonably priced GPUs, which led to a decrease in demand for self-built gaming PCs and systems and its related components. We also experienced higher cost of goods sold in 2021 primarily related to expenses on freight and logistics due to supply chain and logistics issues. The full extent of the impact of COVID-19 pandemic remains uncertain, which has and may continue to negatively impact our net revenue and gross margin. While we experienced the aforementioned challenges in 2021 caused by the COIVD-19 pandemic, our 2021 revenue and gross profits represented strong growth from 2019, pre-pandemic, by 73.5% and 129.1%, respectively.

In the last 18 months, we have entered into three large new markets: microphones and cameras for content creators and gaming monitors for both gamers and content creators. In addition, we have launched 141 new products in 2021. Over the longer term, we believe we will be able to continue to grow in new markets as well as the markets that we participate in through innovation and leading technologies and entry into new categories via organic growth or acquisition. Since 2018, we have completed eight acquisitions, including our acquisition of a 51% of the share capital of iDisplay Technology, or “iDisplay”, a leader in electronic development and design specializing in display technology, in January 2022.

44

Table of Contents

Key Factors Affecting Our Business

Our results of operations and financial condition are affected by numerous factors, including those discussed in the section titled “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K and those described below.

Impact of Industry Trends. Our results of operations and financial condition are impacted by industry trends in the gaming market, including:

Impact of Product Mix. Our gamer and creator peripherals segment has a higher gross margin than our gaming components and systems segment. As a result, our overall gross margin is affected by changes in product mix. External factors can have an impact on our product mix, such as popular game releases that can increase sales of peripherals and availability of new CPUs and GPUs that can impact component sales. In addition, within our gamer and creator peripherals and gaming components and systems segments, gross margin varies between products, and significant shifts in product mix within either segment may also significantly impact our overall gross margin.

Impact of Customer Concentration. We operate a global sales network that consists primarily of retailers (including eRetailers), as well as distributors we use to access certain retailers. Further, a limited number of retailers and distributors represent a significant portion of our net revenue, with eRetailer Amazon accounting for 26.7%, 24.6% and 25.1% of our net revenue for 2021, 2020, and 2019, respectively, and sales to our ten largest customers accounting for approximately 51.7%, 52.7%, and 51.6% of our net revenue for the same periods, respectively. Our customers typically do not enter into long-term agreements to purchase our gear but instead enter into purchase orders with us. As a result of this concentration and the lack of long-term agreements with our customers, a primary driver of our net revenue and operating performance is maintaining good relationships with these retailers and distributors. To help maintain good relationships, we implement initiatives such as our updated packaging design which helps eRetailers such as Amazon process our packages more efficiently. Further, given our global operations, a significant percentage of our expenses relate to shipping costs. Our ability to effectively optimize these shipping expenses, for example utilizing expensive shipping options such as air freight for smaller packages and more urgent deliveries and more cost-efficient options, such as train or boat, for other shipments, has an impact on our expenses and results of operations.

Impact of New Product Introductions. Gamers demand new technology and product features, and we expect our ability to accurately anticipate and meet these demands will be one of the main drivers for any future sales growth and market share expansion. In 2021, we had several product introductions that had a favorable impact on our net revenue and operating results, such as the introduction of our new K65 mini RGB keyboard, Elgato’s new accessories including our new Facecam, Corsair DDR5 memory and new high-performance gaming controllers including SCUF Reflex, Reflex Pro and Reflex FPS, among others. However, there can be no assurance that our new product introductions will have a favorable impact on our operating results or that customers will choose our new gear over those of our competitors.

Impact of Seasonal Sales Trends. Since 2020, our revenue seasonality has been impacted positively and negatively, and thus has not followed historic patterns, by external events, such as shelter-in-place restrictions, global supply chain and logistics issues and availability of affordable GPUs, primarily caused by the COVID-19 pandemic. Historically, prior to 2020, we have experienced and expect to continue to experience seasonal fluctuations in sales due to the buying patterns of our customers and spending patterns of gamers. Our net revenue has generally been lowest in the first and second calendar quarters due to lower consumer demand following the fourth quarter holiday season and because of the decline in sales that typically occurs in anticipation of the introduction of new or

45

Table of Contents

enhanced CPUs, GPUs, and other computer hardware products, which usually take place in the second calendar quarter and which tend to drive sales in the following two quarters. Further, our net revenue tends to be higher in the third and fourth calendar quarter due to seasonal sales such as “Black Friday,” “Cyber Monday” and “Singles Day” in China, as retailers tend to make purchases in advance of these sales, and our sales also tend to be higher in the fourth quarter due to the introduction of new consoles and high-profile games in connection with the holiday season. As a consequence of seasonality, our net revenue for the second calendar quarter is generally the lowest of the year followed by the first calendar quarter. Historical seasonal patterns may not continue in the future and have been impacted, and may be further impacted in the future, by increasing supply constraints, GPU shortages, shifts in customer behavior and the evolving impacts of the COVID-19 pandemic.

Impact of Fluctuations in Currency Exchange Rates. We are subject to inherent risks attributed to operating in a global economy. Some of our international sales are denominated in foreign currencies and any unfavorable movement in the exchange rate between U.S. dollars and the currencies in which we conduct sales in foreign countries, in particular the Euro and the British Pound could have an adverse impact on our net revenue. In addition, we generally pay our employees located outside the United States in the local currency, with a significant portion of those payments being made in Taiwan dollars and Euros. As a result of our foreign sales and operations, we have other expenses, assets and liabilities that are denominated in foreign currencies, in particular the Chinese Yuan, Euro and British Pound.

Impact of COVID-19. Due to the COVID-19 pandemic, there has been and will continue to be uncertainty and disruption in the global economy and financial markets. Since early 2020, we have experienced some business disruptions due to COVID-19, including the stoppage in our factories in early 2020, disruption in our supply chain and increased distribution costs in 2021, which led to increases in operating costs such as the significantly elevated ocean freight costs we incurred in the second half of 2021 as compared to the same period of 2020. These negative financial impacts have been offset by revenue growth in 2020 and 2021, partly due to an increase in demand for our gear as more people are under shelter-in-place restrictions, which we believe have limited people’s access to alternative forms of entertainment and social interaction, and thus have increased the demand for home entertainment and connecting with others through content creation. In contrast, as the COVID-19 pandemic subsides, it has, and could continue to, result in shelter-in-place and other similar restrictions being eased. Such easing of restrictions likely has, and will continue to, result in consumers returning to other alternative forms of entertainment and interaction. This in turn has, and could continue to, result in a decline in demand for our products. The full extent of the impact of the COVID-19 pandemic on our business, results of operations, cash flows and financial position will depend on future developments, which are highly uncertain and cannot be fully predicted.

We continue to evaluate the nature and extent of the impact of the COVID-19 pandemic to our business and we have implemented various measures to attempt to mitigate the disruptive logistics impact to our business, specifically around managing inventory stocking level at our distribution hubs and determining the mode of shipment used to deploy our gear to the customers, and we are also ready to implement adjustments to our expenses and cash flow in the event of declines in revenues.

Impact of Fluctuations in Integrated Circuits Pricing. Integrated circuits, or ICs, account for most of the cost of producing our high-performance memory products. IC prices are subject to pricing fluctuations which can affect the average sales prices of memory modules, and thus impact our net revenue, and can have an effect on gross margins. The impact on net revenues can be significant as our high-performance memory products, included within our gaming components and systems segment, represent a significant portion of our net revenue.

Components of our Operating Results

Net Revenue

We generate materially all of our net revenue from the sale of gamer and creator peripherals and gaming components and systems to retailers, including online retailers, gamers and distributors worldwide. Our revenue is recognized net of allowances for returns, discounts, sales incentives and any taxes collected from customers.

Cost of Revenue

Cost of revenue consists of product costs, including costs of contract manufacturers, inbound freight costs from manufacturers to our distribution hubs as well as inter-hub shipments, cost of materials and overhead, duties and tariffs, warranty replacement cost to process and rework returned items, depreciation of tooling equipment, warehousing costs, excess and obsolete inventory write-downs,

46

Table of Contents

and certain allocated costs related to facilities and information technology, or IT, and personnel-related expenses and other operating expenses related to supply chain logistics.

Operating Expenses

Operating expenses consist of sales, general and administrative expenses and product development expenses.

Sales, general and administrative. Sales, general and administrative, or SG&A expenses represent the largest component of our operating expenses and consist of distribution costs, sales, marketing and other general and administrative costs. Distribution costs include outbound freight and the costs to operate our distribution hubs. Sales and marketing costs relate to the costs to operate our global sales force that works in conjunction with our channel partners, gaming team and event sponsorships, advertising and marketing promotions of our products and services, costs of maintaining our web store and credit card processing fees related to sales on our webstore, personnel-related cost and allocated overhead costs. General and administrative costs consist primarily of personnel-related expenses for our finance, legal, human resources, IT and administrative personnel, as well as the costs of professional services related to these functions and allocated overhead costs.

We expect our total sales, general and administrative expenses to increase in absolute dollars as we continue to actively promote and distribute a higher volume of our products and also due to the anticipated growth of our business and related infrastructure, including increase in legal, accounting, insurance, compliance, investor relations and other consulting costs.

Product development. Product development costs are generally expensed as incurred. Product development costs consist primarily of the costs associated with the design and testing of new products and improvements to existing products. These costs relate primarily to compensation of personnel and consultants involved with product design, definition, compatibility testing and qualification, as well as depreciation costs of equipment used, prototype material costs and allocated overhead costs.

We expect our product development expenses to increase in absolute dollars as we continue to make significant investments in developing new products and enhancing existing products.

Interest Expense

Interest expense consists of interest associated with our debt financing arrangements, including our revolving line of credit, amortization of debt issuance costs and debt discounts, loss from debt extinguishment, consisting of the write-off of unamortized debt discount and fees associated with the prepayment of our term loans, and the change in fair value of our interest rate cap contracts.

Other (Expense) Income, Net

Other (expense) income, net consists primarily of our foreign currency exchange gains and losses relating to transactions and remeasurement of asset and liability balances denominated in foreign currencies. We expect our foreign currency gains and losses to continue to fluctuate in the future due to changes in foreign currency exchange rates.

Income Tax (Expense) Benefit

We are subject to income taxes in the United States and foreign jurisdictions in which we do business. These foreign jurisdictions have statutory tax rates different from those in the United States. Accordingly, our effective tax rates will vary depending on the relative proportion of foreign to United States income, the utilization of foreign tax credits and changes in tax laws. Deferred tax assets are reduced through the establishment of a valuation allowance, if, based upon available evidence, it is determined that it is more likely than not that the deferred tax assets will not be realized.

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the tax and financial reporting bases of our assets and liabilities. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in future years in which those temporary differences are expected to be recovered or settled.

47

Table of Contents

Results of Operations

The following tables set forth the components of our consolidated statements of operations, in dollars and as a percentage of total net revenue, for each of the periods presented.

Components of Results of Operations

Net Revenue

Net revenue increased $201.7 million, or 11.8%, in 2021 as compared to 2020. This was due to a 20.0% increase in sales for our gamer and creator peripherals segment and an 8.1% increase in sales for our gaming components and systems segment. This increase in sales was largely due to increased demand for our products in 2020 and the first half of 2021 driven by the COVID-19 pandemic, with such growth beginning to slow down in the second half of 2021, partly due to the easing of the COVID-19 shelter-in-place restrictions resulting in the reopening of most outside entertainment. In addition, our second half 2021 revenue was negatively

48

Table of Contents

impacted by the global supply and logistics constraints caused by the COVID-19 pandemic, as well as the shortage of reasonably priced GPUs.

Net revenue increased $605.2 million, or 55.2%, in 2020 as compared to 2019. This increase was due to strong revenue growth in both segments. We believe the increased demand of our products was generally due to a larger number of consumers gaming and working from home due to the COVID-19 pandemic in 2020, in addition to existing customers upgrading their systems and gear for a better gaming and/or streaming experience, and to a lesser extent, the inclusion of post-acquisition revenues from our acquisitions of SCUF and Origin.

Gross Profit and Gross Margin

Gross margin decreased to 27.0% in 2021 from 27.3% in 2020. The decrease was driven primarily by an increase in logistics costs which were largely driven by global shipping and logistics challenges caused by the COVID-19 pandemic, and increased promotional activity. These negative impacts were partially offset by an increase in gross margin from an improved product mix with more sales from the higher margin gamer and creator peripherals segment.

Gross margin increased to 27.3% in 2020 from 20.4% in 2019. The increase in gross margin was primarily driven by increased sales volume, an improved product mix with more higher margin products being sold in 2020 as compared to 2019 and less promotional activity. This increase was partially offset by increased air freight costs driven primarily by tightness in inventory supply due to the COVID-19 pandemic in 2020.

As the global shipping and logistics challenges continue into 2022, we expect our 2022 gross margins to remain pressured by elevated logistics costs.

Sales, General and Administrative (SG&A)

SG&A expenses increased $58.7 million, or 22.8%, in 2021 as compared to 2020. The increase was primarily due to a $22.4 million increase in distribution costs primarily driven by an increase in sales volume as well as higher freight costs due to the global supply chain and logistics constraints caused by the COVID-19 pandemic, a $18.3 million increase in personnel-related costs due to headcount growth and higher stock-based compensation, a $5.3 million increase in director and officer insurance policy fees, a $5.2 million increase in marketing and advertising expenses, mainly due to increase in sponsorships and digital marketing programs, and a $3.5 million increase in credit card fees due to increased sales through our webstore.

SG&A expenses increased $94.0 million, or 57.6%, in 2020 as compared to 2019. The increase was primarily due to the inclusion of $29.1 million of SCUF’s post-acquisition SG&A expenses, including debt refinancing costs for funding the SCUF acquisition and acquisition and integration costs related to the SCUF Acquisition, a $27.4 million increase in distribution costs including outbound freight and the costs to operate our distribution hubs due to increased sales volume, a $24.3 million increase in personnel-related costs due to headcount growth and higher bonus expense, a $6.0 million increase in marketing expenses and a $4.4 million increase in fees primarily related to increased credit card fees due to increased sales through our webstore and fees from our insurance policies.

Product Development

Product development expenses increased $10.2 million, or 20.4%, in 2021 as compared to 2020. The increase was primarily due to a $6.9 million increase in personnel-related expenses due to headcount growth and higher stock-based compensation, a $1.4 million

49

Table of Contents

increase in consultant and contractor expense supporting our business development efforts and a $1.9 million increase in other product development related costs to support our continued innovation and broadening of our product portfolio.

Product development expenses increased $12.5 million, or 33.3%, in 2020 as compared to 2019. The increase was primarily driven by a $5.7 million increase in personnel-related expenses due to headcount growth and higher bonus expense, the inclusion of $5.8 million of SCUF’s post-acquisition product development expenses and a $5.5 million increase in other product development related expenses. These increases were partially offset by a $4.5 million decrease in amortization expense of developed technologies intangible assets.

Interest Expense and Other Expense, Net

Interest expense decreased $17.5 million, or 49.7%, in 2021 as compared to 2020. The decrease was primarily due to lower interest expense paid in 2021 for our First Lien Term Loan as a result of the partial and full repayment of such loan in 2020 and 2021, and no interest paid for our Second Lien Term Loan due to the full repayment of such loan in 2020. Additionally, to a lesser extent, the decrease was due to the lower interest rate on our new Term Loan (defined below) executed in September 2021 which replaced our First Lien Term Loan (defined below). These decreases in interest expense were offset partially by higher losses incurred on debt extinguishment in 2021 compared to 2020 as the total debt amount extinguished in 2021 was higher than in 2020.

Interest expense decreased $0.4 million, or 1.2%, in 2020 as compared to 2019. The decrease was primarily due to lower interest expense paid in 2020 for our First Lien Term Loan and Second Lien Term Loan as a result of the partial extinguishment of our First Lien Term Loan and full extinguishment of our Second Lien Term Loan as well as a decrease in interest from borrowings from our line of credit. The decrease in interest expense was partially offset by an aggregate of $4.2 million write-off of deferred debt discounts and issuance costs associated with extinguishments of our term loans and a $0.5 million loss recognized for the change in fair value of our interest rate cap contracts.

Other (expense) income, net relates primarily to the gains and losses resulting from the impact of foreign exchange rate changes on our cash, accounts receivable and intercompany balances denominated in currencies other than the functional currencies in our subsidiaries. Our foreign currency exposure is primarily driven by fluctuations in the foreign currency exchanges rates of the Euro, British Pound and the Chinese Yuan.

Income Tax (Expense) Benefit  

We are subject to income taxes in the United States and foreign jurisdictions in which we do business. These foreign jurisdictions have statutory tax rates different from those in the United States. Accordingly, our effective tax rates will vary depending on the relative proportion of foreign to United States income, the utilization of net operating loss and tax credit carry forwards, changes in geographic mix of income and expense, and changes in management’s assessment of matters such as the ability to realize deferred tax assets, and changes in tax laws.

Our effective tax rates were tax expense of 11.9% and 15.4% for 2021 and 2020, respectively. The change in effective tax rate for 2021 as compared to 2020 was primarily due to excess tax benefits from stock-based compensation as well as the recognition of a $3.1 million tax benefit resulting from the change in management’s assessment of the realizability of our California deferred tax assets as a result of the increased U.S. profitability.

Our effective tax rates were tax expense of 15.4% and tax benefit of 37.4% for 2020 and 2019, respectively. The change in effective tax rate for 2020 as compared to 2019 was primarily due to an increase in income before income tax compared to 2019, the change in the mix of income and losses in the various tax jurisdictions in which we operate, the recognition of a $4.6 million tax benefit resulting from the change in management’s assessment of the realizability of certain deferred tax assets as a result of the reorganization of our organizational structure in connection with our IPO, and a $0.6 million one-time benefit from the change in tax law resulting from the enactment of the Coronavirus Aid, relief and Economic Security Act (“CARES Act”) in the first quarter 2020.

50

Table of Contents

Segment Results

Segment Net Revenue

The following table sets forth our net revenue by segment expressed both in dollars (thousands) and as a percentage of net revenue: